Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
| Every 50,000 mi | Timing Belt (inspect) |
| Every 100,000 mi | Oxygen Sensor (replace) |
Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2001 M Roadster.
The 2001 BMW M Roadster, built on the E36 platform, is equipped with a manual 5‑speed transmission and EPA‑rated fuel economy of 15/23/18 mpg. Its engine requires 7.0 qt of oil that must meet 15W‑40, 10W‑40 or 10W‑30 API SJ specifications. During its production years 1998‑2008 the model recorded only five owner complaints, all related to the engine and cooling system, with no recalls, and its 2001 production year falls near the low‑complaint end of the range, where annual complaints had dropped to a single figure by 2008.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 48 · 650 CCA battery, OE oil filter 11421741000. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11421741000 alt 11421730389 |
| Engine air filter | 13721730449 |
| Fuel filter | 13321740985 alt 13327512019 |
| Spark plug | 12120037607 alt 12120022902 |
| Battery | 61217586960 alt 61218381738 |
| Front wiper blades | 61611387678 alt 61619070581 |
| Thermostat | 11531318274 alt 11537509357 |
Engine, drivetrain, dimensions and economy.
| Transmission | Manual 5-spd |
| Overall length | 176.8 in |
| Overall width | 69.3 in |
| Overall height | 53.9 in |
| Wheelbase | 107.5 in |
| Track (front / rear) | 57.9 / 58.3 in |
| EPA city / highway / combined | 15 / 23 / 18 mpg |
| Drivetrain | Rear-Wheel Drive |
| Recommended fuel | Premium Gasoline |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 7.0 qt of 15W-40 / 10W-40 / 10W-30 API SJ engine oil, DOT 4 brake fluid. Torque lug nuts to 88 ft-lbs, the oil drain plug to M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs. The firing order is 1-5-3-6-2-4. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 2 Pints |
| Differential Gear Oil Capacity | 3 Pints |
| Engine Coolant | ETHYLENE GLYCOL |
| Engine Oil | 15W-40 · API · 10W-40 · 10W-30 · 5W-30 |
| Engine Oil Capacity | 7.0 qt |
| Engine Oil | 15W-40 · API · 10W-40 · 10W-30 · 5W-30 |
| Engine Oil Capacity | 7.0 qt |
| Crankshaft Pulley and/or Damper Bolts | 302 ft-lbs |
| Crankshaft Pulley and/or Damper Bolts | 221 ft-lbs |
| Crankshaft Pulley and/or Damper Bolts | 302 ft-lbs |
| Engine Flywheel Bolts | AT: 89 ft-lbs, MT: 78 ft-lbs |
| Engine Flywheel Bolts | AT: 89 ft-lbs, MT: 78 ft-lbs |
| Engine Oil Pan Drain Plug | M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs |
| Oil Pump to Cylinder BLock Bolts/Studs | 17 ft-lbs |
| Lug Nuts | 88 ft-lbs |
| Cylinder Firing Order | 1-5-3-6-2-4 |
| Ignition Coil Primary Resistance | 0.8 ohms |
| Spark Plug Manufacturer | BMW |
| Refrigerant | R134a |
| Refrigerant Capacity | 1.75-2.26 lbs |
| Oil Group | PAG |
| Oil Type | 46 |
| Standard BCI Group Number | 48 |
| Standard BCI Cranking Performance | 650 cca |
| Standard BCI Group Number | 48 |
| Standard BCI Cranking Performance | 650 cca |
| Pressure Test | 14.5 psi |
| Radiator Cap Pressure Relief | 13-17 psi |
| Thermostat Opening Temperature | 207 °F |
| Pressure Test | 14.5 psi |
| Radiator Cap Pressure Relief | 13-17 psi |
| Thermostat Opening Temperature | 176 °F |
| Injector Primary Resistance | 15-17 ohms |
| Engine Compression | 142-156 psi |
| Brake Application | WITH SOLID ROTOR / WITH VENTED ROTOR |
| Torque Caliper to Bracket | 81 ft-lbs / 18-22 ft-lbs |
| Torque to Knuckle | 81-96 ft-lbs / 81 ft-lbs |
| Brake Application | WITH SOLID ROTOR / WITH VENTED ROTOR |
| Torque Caliper to Bracket | 18-22 ft-lbs |
| Torque to Knuckle | 49 ft-lbs |
| Torque Caliper to Bracket | 81 ft-lbs |
| Torque to Knuckle | 81-96 ft-lbs |
| 1 | 14 ft. lbs., Step 2: 15 ft. lbs., Step 3: 70 | 14 ft. lbs |
| 1 | 4 ft. lbs., Step 2: 15 ft. lbs., Step 3: 70 | 4 ft. lbs |
| 1 | 29.5 ft. lbs. | 29.5 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | 90 | |
| 1 | 25-29 ft. lbs. | 25–29 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | 90 | |
| 1 | 29.5 ft. lbs. | 29.5 ft. lbs |
| 2 | 90.0 ft. lbs. | 90 ft. lbs |
| 3 | 90.0 ft. lbs. | 90 ft. lbs |
| 1 | 15 ft. lbs., Step 2: 70 | 15 ft. lbs |
| 1 | 15 ft. lbs., Step 2: 70 | 15 ft. lbs |
Normal service, condensed from the factory interval matrix.
| Every 50,000 mi | Timing Belt (inspect) |
| Every 100,000 mi | Oxygen Sensor (replace) |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
The 2001 model year represents a significant improvement in complaint volume compared to the preceding 1998-2000 period, with only 5 complaints registered versus the consistent 18-19 complaints seen in those earlier years, though the data does not specify the root cause of this decline. The 2001 model maintains the same TSB count (7) as 1998 and 2000, while the entire generation shows zero recalls and zero investigations through 2001, with complaint distribution concentrated in Engine & Engine Cooling (3 incidents) and Vehicle Speed Control (1 incident), alongside 2 crash-related complaints and 0 fire complaints. Positioned after the 1998-2000 production window and before the 2008 outlier year—which shows 22 TSBs but only 1 complaint—2001 benefits from the lowest complaint rate in the active federal dataset while avoiding the elevated service bulletin activity seen in later years. Given its minimal complaint footprint, absence of recalls, and stable technical service bulletin activity relative to its immediate predecessors, 2001 stands out as the most favorable model year in this federal record for a used M Roadster purchase.
All 5 complaints on record, top 3 components.
Source: NHTSA Office of Defects Investigation complaint database.
No recall campaigns on record with NHTSA for this vehicle as of the last data refresh.
Showing 5 of 7 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| B340714 | 2023-10-13 | Service Brakes, Hydraulic | Functional noises (squealing/honking) when braking shortly before the vehicle comes to a… |
| SIB-34-04-14 | 2014-12-01 | Service Brakes | BMW: RUNNING NOISES HEARD WHEN BRAKES ARE APPLIED, WITH HIGH BRAKE LOADS; THROUGH WHEEL… |
| SIB-63-02-01 | 2010-08-01 | Exterior Lighting | BMW: PROCEDURE FOR DETERMINING AND REPLACING INCANDESCENT AND HALOGEN LIGHT BULBS UNDER… |
| SIB-16-02-09 | 2009-12-01 | Fuel System, Gasoline | BMW VEHICLES: FUEL LEVEL SENSOR REPAIRS. WHERE IT IS NECESSARY TO REPLACE THE RIGHT OR… |
| 120204 | 2006-02-01 | Electrical System | BREMI IGNITION COIL REPLACEMENT ON S54 ENGINE. THIS SERVICE BULLETIN SUPERSEDES SI120803… |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
7.0 qt of HIGH PERFORMANCE MINERAL OILS: ABOVE 5 degrees F: 15W-40 API SJ, SL OR SM, -5 degreesF TO 68 degrees F: 10W-40 API SJ, SL OR SM, 5 degreesF TO 50 degrees F: 10W-30 API SJ, SL OR SM, BELOW 50 degrees F: 5W-30 API SJ, SL OR SM, BELOW 32 degrees F:, per the factory manual.
NHTSA lists 0 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 15 city / 23 highway / 18 combined mpg.