Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the spark plugs every 100,000 mi.
| Every 100,000 mi | Oxygen Sensor (replace) · Spark Plugs (replace) |
Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2002 M Roadster.
The 2002 BMW M Roadster. It takes 7.0 qt of 15W-40 engine oil.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 48 · 570 CCA battery, OE oil filter 11421741000. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11421741000 alt 11427512300 |
| Engine air filter | 13721730449 |
| Fuel filter | 13327831089 alt 13327512019 |
| Spark plug | 12120022902 alt 12129071003 |
| Battery | 61217586960 alt 61218381738 |
| Front wiper blades | 61619070581 alt 61611387678 |
| Thermostat | 11531318274 alt 11537509357 |
Engine, drivetrain, dimensions and economy.
| Overall length | 158.7 in |
| Overall width | 68.5 in |
| Overall height | 50 in |
| Wheelbase | 96.9 in |
| Curb weight | 3086 lb |
| Track (front / rear) | 55.9 / 58.7 in |
| Weight distribution (front / rear) | 50/50 |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 7.0 qt of 15W-40 / 10W-40 / 10W-30 API SJ engine oil, DOT 4 brake fluid. Torque lug nuts to 88 ft-lbs, the oil drain plug to M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs. The firing order is 1-5-3-6-2-4. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 2 Pints |
| Differential Gear Oil Capacity | 3 Pints |
| Engine Coolant | ETHYLENE GLYCOL |
| Engine Oil | 15W-40 · API · 10W-40 · 10W-30 · 5W-30 |
| Engine Oil Capacity | 7.0 qt |
| Engine Oil | 15W-40 · API · 10W-40 · 10W-30 · 5W-30 |
| Engine Oil Capacity | 7.0 qt |
| Crankshaft Pulley and/or Damper Bolts | 302 ft-lbs |
| Crankshaft Pulley and/or Damper Bolts | 302 ft-lbs |
| Crankshaft Pulley and/or Damper Bolts | 221 ft-lbs |
| Engine Flywheel Bolts | AT: 89 ft-lbs, MT: 78 ft-lbs |
| Engine Flywheel Bolts | AT: 89 ft-lbs, MT: 78 ft-lbs |
| Engine Oil Pan Drain Plug | M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs |
| Oil Pump to Cylinder BLock Bolts/Studs | 17 ft-lbs |
| Lug Nuts | 88 ft-lbs |
| Cylinder Firing Order | 1-5-3-6-2-4 |
| Ignition Coil Primary Resistance | 0.8 ohms |
| Ignition Coil Primary Resistance | 0.8 ohms |
| Spark Plug Manufacturer | BMW |
| Refrigerant | R134a |
| Refrigerant Capacity | 1.75-2.26 lbs |
| Oil Group | PAG |
| Oil Type | 46 |
| Standard BCI Group Number | 48 |
| Standard BCI Cranking Performance | 570 cca |
| Standard BCI Group Number | 48 |
| Standard BCI Cranking Performance | 570 cca |
| Pressure Test | 14.5 psi |
| Radiator Cap Pressure Relief | 13-17 psi |
| Thermostat Opening Temperature | 207 °F |
| Pressure Test | 14.5 psi |
| Radiator Cap Pressure Relief | 13-17 psi |
| Thermostat Opening Temperature | 176 °F |
| Injector Primary Resistance | 15-17 ohms |
| Engine Compression | 142-156 psi |
| Brake Application | WITH SOLID ROTOR / WITH VENTED ROTOR |
| Torque Caliper to Bracket | 81 ft-lbs / 18-22 ft-lbs |
| Torque to Knuckle | 81-96 ft-lbs / 81 ft-lbs |
| Brake Application | WITH SOLID ROTOR / WITH VENTED ROTOR |
| Torque Caliper to Bracket | 18-22 ft-lbs |
| Torque to Knuckle | 49 ft-lbs |
| Torque Caliper to Bracket | 81 ft-lbs |
| Torque to Knuckle | 81-96 ft-lbs |
| 1 | 14 ft. lbs., Step 2: 15 ft. lbs., Step 3: 70 | 14 ft. lbs |
| 1 | 4 ft. lbs., Step 2: 15 ft. lbs., Step 3: 70 | 4 ft. lbs |
| 1 | 29.5 ft. lbs. | 29.5 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | 90 | |
| 1 | 25-29 ft. lbs. | 25–29 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | 90 | |
| 1 | 29.5 ft. lbs. | 29.5 ft. lbs |
| 2 | 90.0 ft. lbs. | 90 ft. lbs |
| 3 | 90.0 ft. lbs. | 90 ft. lbs |
| 1 | 15 ft. lbs., Step 2: 70 | 15 ft. lbs |
| 1 | 15 ft. lbs., Step 2: 70 | 15 ft. lbs |
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the spark plugs every 100,000 mi.
| Every 100,000 mi | Oxygen Sensor (replace) · Spark Plugs (replace) |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
7.0 qt of HIGH PERFORMANCE MINERAL OILS: ABOVE 5 degrees F: 15W-40 API SJ, SL OR SM, -5 degreesF TO 68 degrees F: 10W-40 API SJ, SL OR SM, 5 degreesF TO 50 degrees F: 10W-30 API SJ, SL OR SM, BELOW 50 degrees F: 5W-30 API SJ, SL OR SM, BELOW 32 degrees F:, per the factory manual.