Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the spark plugs every 60,000 mi.
| Every 60,000 mi | Spark Plugs (replace) |
| At 120,000 mi | Oxygen Sensor (replace) |
Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2012 X6 50I.
The 2012 BMW X6 50I is a midsize luxury SUV built on the E71 platform, pairing its twin-turbocharged V8 with an eight-speed automatic transmission and an EPA-estimated 19 mpg combined. It requires 6.9 quarts of 15W-40, 10W-40, or 10W-30 API SJ oil, a detail that underscores the engine’s specific maintenance demands. This model year sits within a generation that accumulated 34 owner complaints and 7 recalls, with the engine category emerging as the most reported trouble spot, signaling a reliability record that warrants careful pre-purchase inspection.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 49 · 900 CCA battery, OE oil filter 11428683168. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11428683168 alt 11428637821 |
| Engine air filter | 13717571355 alt 13717577457 |
| Spark plug | 12120037580 alt 12120037581 |
| Battery | 61217594976 |
| Front wiper blades | 61610077821 |
| Thermostat | 11538632664 alt 11537586885 |
| Cabin air filter | 64319194098 alt 64119248294 |
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic (S8) |
| Overall length | 192.5 in |
| Overall width | 78 in |
| Overall height | 66.9 in |
| Wheelbase | 115.4 in |
| Track (front / rear) | 65 / 64.6 in |
| Weight distribution (front / rear) | 50/50 |
| EPA city / highway / combined | 16 / 23 / 19 mpg |
| Drivetrain | All-Wheel Drive |
| Recommended fuel | Premium Gasoline |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 6.9 qt of 15W-40 / 10W-40 / 10W-30 API SJ engine oil, DOT 4 brake fluid. Torque lug nuts to 103 ft-lbs, the oil drain plug to M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs. The firing order is 1-5-4-8-6-3-7-2. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Automatic Transmission Fluid | BMW part number 83222152426 |
| Automatic Transmission Fluid Capacity | 10.5-11.5 |
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 1.1 Pints |
| Differential Gear Oil Capacity | 2.1 Pints |
| Differential Gear Oil Capacity | 2.1 Pints |
| Engine Coolant | ETHYLENE GLYCOL |
| Engine Oil | 15W-40 · API · 10W-40 · 10W-30 · 5W-30 |
| Crankshaft Pulley and/or Damper Bolts | 18 ft-lbs |
| Intake Manifold to Engine Bolts | 11 ft-lbs |
| Intake Manifold to Engine Bolts | 11 ft-lbs |
| Engine Oil Pan Drain Plug | M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs |
| Lug Nuts | 103 ft-lbs |
| Transfer Case Fill Plug | 24.0 ft-lbs |
| Transfer Case Drain Plug | 24.0 ft-lbs |
| Front Wheel Hub | 310 ft-lbs |
| Rear Wheel Hub | 310 ft-lbs |
| Cylinder Firing Order | 1-5-3-6-2-4 |
| Cylinder Firing Order | 1-5-4-8-6-3-7-2 |
| Spark Plug Manufacturer | BMW |
| Refrigerant | R134a |
| Oil Group | PAG |
| Oil Type | 46 |
| Standard BCI Group Number | 49 |
| Standard BCI Cranking Performance | 900 cca |
| Optional BCI Group Number | 95R |
| Optional BCI Cranking Performance | 950 cca |
| Optional BCI Group Number | 95R |
| Pressure Test | 21.7 psi |
| Radiator Cap Pressure Relief | 17-22 psi |
| Pressure Test | 29 psi |
| Radiator Cap Pressure Relief | 28-32 psi |
| Engine Compression | 145-232 PSI. 29 maximum variation. psi |
| Minimum Pad Thickness | Front: 0.145; Rear: 0.145 pads |
| 1 | 15 ft. lbs., Step 2: 140 | 15 ft. lbs |
| 1 | 73 ft. lbs., step 2: 60 degrees, step 3: 60 degrees, step 4: 60 | 73 ft. lbs |
Prep Do not reuse old bolts
| 1 | 22.0 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | Bolts 1-10 90 degrees | 90 degrees |
| 4 | 45 degrees | 45 degrees |
| 1 | 22.0 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | 90 degrees | 90 degrees |
Prep Do not reuse old bolts
| 1 | 22.0 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | 90 degrees | 90 degrees |
| 1 | 6 ft. lbs., Step 2: 9.6 | 6 ft. lbs |
| 1 | 7 ft. lbs., Step 2: 11 ft. lbs., Step 15 | 7 ft. lbs |
| 1 | 15 ft. lbs., Step 2: 70 | 15 ft. lbs |
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the spark plugs every 60,000 mi.
| Every 60,000 mi | Spark Plugs (replace) |
| At 120,000 mi | Oxygen Sensor (replace) |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
Owner complaints about the 2012 BMW X6 50I dominate in one area — the engine, 11 of 34 reports (32%), well ahead of the next concern. That matters, because the engine are also the target of recall 18V-248 on this vehicle — so the single most useful check before buying or servicing one is confirming it was actually performed. 2 of the reports describe a crash and 0 a fire — a small share of the total, but worth weighing against the engine pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.
All 34 complaints on record, top 8 components.
Source: NHTSA Office of Defects Investigation complaint database.
Showing 1 of 1 campaigns on record for this vehicle.
BMW of North America, LLC (BMW) is recalling certain 2011-2012 BMW 550i, 550i xDrive, 550i Gran Turismo, 550i Gran Turismo xDrive, 750i, 750Li, 750i xDrive, 750Li xDrive, 760Li, X5 xDrive50i, X5 M, X6 xDrive50i, X6 M… Remedy: BMW will notify owners, and dealers will replace the electric auxiliary water pump, free of charge. Depending on the model, there are currently limited parts available, however…
Showing 5 of 218 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| B012016 | 2026-05-06 | Electrical System | The Footwell Module (FRM) limited warranty for defects in materials and / or workmanship… |
| B065825 | 2025-11-18 | Visibility/Wiper | Rear Glass Return |
| B110614 | 2025-03-27 | Engine | This bulletin outlines the Customer Care Package program that has been designed… |
| B012016 | 2025-03-13 | Electrical System | The Footwell Module (FRM) limited warranty for defects in materials and / or workmanship… |
| B012016 | 2025-02-20 | Electrical System | The Footwell Module (FRM) limited warranty for defects in materials and / or workmanship… |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
6.9 qt of HIGH PERFORMANCE MINERAL OILS: ABOVE 5 degrees F: 15W-40 API SJ, SL OR SM, -5 degreesF TO 68 degrees F: 10W-40 API SJ, SL OR SM, 5 degreesF TO 50 degrees F: 10W-30 API SJ, SL OR SM, BELOW 50 degrees F: 5W-30 API SJ, SL OR SM, BELOW 32 degrees F:, per the factory manual.
NHTSA lists 7 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 16 city / 23 highway / 19 combined mpg.