Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2010 X6 50I.
As an E71-chassis BMW SUV, the 2010 X6 50i pairs a 6.9-quart oil capacity — meeting 15W-40, 10W-40, or 10W-30 API SJ viscosity grades — with the S7 automatic transmission and EPA ratings of 17 city, 19 highway, and 18 combined mpg. The powertrain sits at the center of the model's documented ownership record, with engine-related concerns leading just 19 total complaints filed against the model year, even as 12 recalls were issued. That compact, engine-weighted complaint profile frames the 2010 X6 50i as a useful baseline data point in the nameplate's reliability history, giving researchers a reference for how mechanical issues evolved across subsequent production years.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 49 · 900 CCA battery, OE oil filter 11428683168. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11428683168 alt 11427953129 |
| Engine air filter | 13717571355 alt 13717577457 |
| Spark plug | 12120037581 alt 12120037580 |
| Battery | 61217594976 alt 61217586960 |
| Front wiper blades | 61610077821 |
| Thermostat | 11538632664 alt 11537550172 |
| Cabin air filter | 64319194098 alt 64119248294 |
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic (S7) |
| Overall length | 192.5 in |
| Overall width | 78 in |
| Overall height | 66.9 in |
| Wheelbase | 115.4 in |
| Curb weight | 4894 lb |
| Track (front / rear) | 65 / 64.6 in |
| Weight distribution (front / rear) | 50/50 |
| EPA city / highway / combined | 17 / 19 / 18 mpg |
| Drivetrain | All-Wheel Drive |
| Recommended fuel | Premium Gasoline |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 6.9 qt of 15W-40 / 10W-40 / 10W-30 API SJ engine oil, DOT 4 brake fluid. Torque lug nuts to 103 ft-lbs, the oil drain plug to M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs. The firing order is 1-5-4-8-6-3-7-2. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Automatic Transmission Fluid | BMW part number 83222152426 |
| Automatic Transmission Fluid Capacity | 10.5-11.5 |
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 1.5 Pints |
| Differential Gear Oil Capacity | 2.1 Pints |
| Differential Gear Oil Capacity | 2.1 Pints |
| Differential Gear Oil Capacity | 2.5 pints |
| Differential Gear Oil Capacity | 1.1 Pints |
| Crankshaft Pulley and/or Damper Bolts | 18 ft-lbs |
| Engine Flywheel Bolts | AT: 92 ft-lbs, MT: 89 ft-lbs |
| Intake Manifold to Engine Bolts | 11 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 15 ft-lbs |
| Intake Manifold to Engine Bolts | 11 ft-lbs |
| Engine Oil Pan Drain Plug | M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs |
| Lug Nuts | 103 ft-lbs |
| Transfer Case Fill Plug | 24.0 ft-lbs |
| Transfer Case Drain Plug | 24.0 ft-lbs |
| Front Wheel Hub | 310 ft-lbs |
| Rear Wheel Hub | 310 ft-lbs |
| Cylinder Firing Order | 1-5-3-6-2-4 |
| Cylinder Firing Order | 1-5-4-8-6-3-7-2 |
| Spark Plug Manufacturer | BMW |
| Refrigerant | R134a |
| Oil Group | PAG |
| Oil Type | 46 |
| Optional BCI Group Number | 48 |
| Optional BCI Cranking Performance | 570 cca |
| Standard BCI Group Number | 49 |
| Standard BCI Cranking Performance | 900 cca |
| Standard BCI Group Number | 48 Hybrid |
| Pressure Test | 21.7 psi |
| Radiator Cap Pressure Relief | 17-22 psi |
| Pressure Test | 29 psi |
| Radiator Cap Pressure Relief | 28-32 psi |
| Engine Compression | 203-232 PSI. 29 maximum variation. psi |
| Minimum Pad Thickness | Front: 0.145; Rear: 0.145 pads |
| 1 | 15 ft. lbs., Step 2: 137 | 15 ft. lbs |
| 1 | 73 ft. lbs., step 2: 60 degrees, step 3: 60 degrees, step 4: 60 | 73 ft. lbs |
Prep Do not reuse old bolts
| 1 | 22.0 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | Bolts 1-10 90 degrees | 90 degrees |
| 4 | 45 degrees | 45 degrees |
| 1 | 22.0 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | 90 degrees | 90 degrees |
| 1 | 7 ft. lbs., Step 2: 11 ft. lbs., Step 15 | 7 ft. lbs |
| 1 | 15 ft. lbs., Step 2: 70 | 15 ft. lbs |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
Owner complaints about the 2010 BMW X6 50I dominate in one area — the engine, 6 of 19 reports (32%), well ahead of the next concern. That matters, because the engine are also the target of recall 18V-248 on this vehicle — so the single most useful check before buying or servicing one is confirming it was actually performed. 0 of the reports describe a crash and 4 a fire — a small share of the total, but worth weighing against the engine pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.
All 19 complaints on record, top 8 components.
Source: NHTSA Office of Defects Investigation complaint database.
Showing 2 of 9 campaigns on record for this vehicle.
BMW of North America, LLC (BMW) is recalling certain 2007-2013 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5 M vehicles, 2008-2014 X6 xDrive35i, X6 xDrive50i and X6 M vehicles, 2009-2013 X5 xDrive35d… Remedy: Owners are advised not to drive their vehicles until the remedy is performed. BMW will notify owners, and dealers will replace the passenger frontal air bag module, free of…
BMW of North America, LLC (BMW) is recalling certain 2011-2012 BMW 550i, 550i xDrive, 550i Gran Turismo, 550i Gran Turismo xDrive, 750i, 750Li, 750i xDrive, 750Li xDrive, 760Li, X5 xDrive50i, X5 M, X6 xDrive50i, X6 M… Remedy: BMW will notify owners, and dealers will replace the electric auxiliary water pump, free of charge. Depending on the model, there are currently limited parts available, however…
Showing 5 of 299 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| B012016 | 2026-05-06 | Electrical System | The Footwell Module (FRM) limited warranty for defects in materials and / or workmanship… |
| B110614 | 2025-03-27 | Engine | This bulletin outlines the Customer Care Package program that has been designed… |
| B012016 | 2025-03-13 | Electrical System | The Footwell Module (FRM) limited warranty for defects in materials and / or workmanship… |
| B012016 | 2025-02-20 | Electrical System | The Footwell Module (FRM) limited warranty for defects in materials and / or workmanship… |
| B068824 | 2024-12-18 | Unknown Or Other | Screw Cap Return |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
6.9 qt of HIGH PERFORMANCE MINERAL OILS: ABOVE 5 degrees F: 15W-40 API SJ, SL OR SM, -5 degreesF TO 68 degrees F: 10W-40 API SJ, SL OR SM, 5 degreesF TO 50 degrees F: 10W-30 API SJ, SL OR SM, BELOW 50 degrees F: 5W-30 API SJ, SL OR SM, BELOW 32 degrees F:, per the factory manual.
NHTSA lists 12 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 17 city / 19 highway / 18 combined mpg.