Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the engine oil and filter every 7,500 mi; coolant every 30,000 mi. The big-interval services (every 30,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.
| Every 7,500 mi | Engine Oil (drain & refill) · Engine Oil Filter (replace) · Tire & Wheel Assembly (rotate) |
| At 15,000 mi | Steering System (inspect) |
| Every 15,000 mi | Axle Shaft Oil Seal (inspect) · Brake Linings (inspect) · Brake System (inspect) · CV Joint Boot (inspect) · Exhaust System (Complete) (inspect) · Fuel Line (inspect) |
| Every 30,000 mi | Accessory Drive Belt (inspect) · Brake Hydraulic System (drain, refill & bleed) · Engine Air Filter Element (replace) · Engine Coolant System (drain, flush & refill) · Engine Coolant System Hoses (inspect) · Steering System (inspect) |
| At 45,000 mi | Engine Coolant System (drain, flush & refill) · Engine Coolant System Hoses (inspect) |
| Every 60,000 mi | Distributor Cap (inspect) · Distributor Rotor (inspect) · Exhaust System Heat Shield (inspect) · Fuel Filter (replace) · PCV System (inspect) · Universal Vehicle Operation (inspect idle speed) |
| Every 90,000 mi | Timing Belt (replace) · Water Pump (inspect) |