Volkswagen›Golf/GTI/Jetta›1998›Overview/volkswagen/golf-gti-jetta/1998/base/

1998 Volkswagen Golf/GTI/Jetta

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 1998 Golf/GTI/Jetta.

Transmission Automatic 4-spd

The 1998 Volkswagen Golf, GTI, and Jetta paired a four-speed automatic with an engine requiring 4.2 quarts of oil in 5W-50, 10W-50, or 10W-60 API viscosities, carrying EPA ratings of 19 mpg city, 26 highway, and 22 combined. Its reliability record is modest, comprising 19 total owner complaints and one recall, with the electrical system representing the top reported concern. That distribution means the model year’s known issues are few in number and primarily electrical in nature, giving researchers a narrow and well-defined problem set to track.

Model year1999 1998 1997 1996 1995

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity4.2 qtOEM · verified

Engine oil type5W-50 / 10W-50 / 10W-60 APIOEM · verified

Lug nut torque81 ft-lbsOEM · verified

EPA fuel economy19/26/22 mpgEPA · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses a BCI 47 · 520 CCA battery, OE oil filter 06A115561B. Note the factory front wiper blades and serpentine belt are now discontinued — plan on a superseded or quality aftermarket equivalent, which the part pages below list where known. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Battery groupBCI 47 · 520 CCAOEM · verified

Tire size195-60HR14OEM · verified

Wheel / rim6-J inOEM · verified

OE service part numbers OEM · verified

Engine oil filter	06A115561B alt 021115562A
Engine air filter	1H0129620
Fuel filter	1H0201511A
Spark plug	101000044AA alt 101000035AH
Front wiper blades	1H0998003 discontinued · alt 1HM955425A
Serpentine belt	037260849C discontinued · alt 037903137H
Thermostat	044121113 alt 075121113D
Cabin air filter	1J0819644A

Full specifications

Engine, drivetrain, dimensions and economy.

Engine & drivetrain NHTSA vPIC

Transmission

Automatic 4-spd

Ratings & economy EPA / vPIC

EPA city / highway / combined	19 / 26 / 22 mpg
Drivetrain	Front-Wheel Drive
Recommended fuel	Regular Gasoline

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine holds 4.2 qt of 5W-50 / 10W-50 / 10W-60 API engine oil, SYNTHETIC · 75W-90 · GL-4 in the differential, DOT 4 brake fluid. Torque lug nuts to 81 ft-lbs. The firing order is 1-5-3-6-2-4. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.

Lubricants & capacities

Brake Fluid	DOT 4
Differential Gear Oil	SYNTHETIC · 75W-90 · GL-4
Differential Gear Oil Capacity	1.7 Pints
Differential Gear Oil	SYNTHETIC · 75W-90 · GL-4
Differential Gear Oil Capacity	1.7 Pints
Engine Coolant	USE G012ABG-A1 COOLANT
Engine Oil	5W-50 · 10W-50 · 10W-60 · API
Engine Oil Capacity	4.2 qt

Engine torques

Camshaft Bearing/Carrier Cap Bolts or Studs	15 ft-lbs
Camshaft Bearing/Carrier Cap Bolts or Studs	15 ft-lbs
Camshaft Bearing/Carrier Cap Bolts or Studs	15 ft-lbs
Crankshaft Pulley and/or Damper Bolts	Diesel 18 ft-lbs
Crankshaft Pulley and/or Damper Bolts	18 ft-lbs
Intake Manifold to Engine Bolts	15 ft-lbs
Exhaust Manifold to Cylinder Head Bolts	18 ft-lbs
Intake Manifold to Engine Bolts	18 ft-lbs

Chassis torques

Lug Nuts

81 ft-lbs

Ignition

Cylinder Firing Order	1-3-4-2
Cylinder Firing Order	1-5-3-6-2-4
Curb Idle Speed (No Load)	870 rpm
Curb Idle Speed Variance (No Load)	50 rpm
Curb Idle Speed (No Load)	700 rpm
Curb Idle Speed Variance (No Load)	50 rpm
Curb Idle Speed (No Load)	800 rpm
Curb Idle Speed Variance (No Load)	60 rpm

Battery & A/C

Refrigerant	R134a
Refrigerant Capacity	1.76-1.81 lbs
Oil Group	PAG
Oil Type	SP-10
Oil Capacity	3.90-4.00 oz
Standard BCI Group Number	47
Standard BCI Cranking Performance	520 cca
Optional BCI Group Number	97R

Service checks

Injector Primary Resistance	15-20 ohms
Injector Primary Resistance	13.5-14.5 Siemens ohms
Engine Oil Pressure	17.4-23.2 psi @ idle, 39.1-65.2 psi @ 2000
Engine Oil Pressure	29 psi
Engine Oil Pressure RPM	2000 rpm
Engine Oil Pressure	29 psi @ Idle, 43.5-65.3 psi @ 2000
Intake Valve Lash	Hydraulic in
Exhaust Valve Lash	Hydraulic in

Brakes

Torque Caliper to Bracket	26 ft-lbs / 92 ft-lbs
Torque to Knuckle	48 ft-lbs / 80 ft-lbs / 92 ft-lbs
Torque Caliper to Bracket	26 ft-lbs / 92 ft-lbs
Torque to Knuckle	48 ft-lbs / 80 ft-lbs / 92 ft-lbs
Minimum Pad Thickness	Front: 0.276; Rear: 0.276 specification
Rotor Nominal Thickness From	0.394 in / 0.472 in / 0.788 in
Rotor Nominal Thickness To	0.394 in / 0.472 in / 0.788 in
Rotor Discard at or Under	0.315 in / 0.394 in / 0.709 in

Multi-step torque procedures OEM · verified

Connecting Rod (Large End) Bearings — tightening sequence 1 stages

22 ft. lbs., Step 2: 90

22 ft. lbs

Connecting Rod (Large End) Bearings — tightening sequence 1 stages

22 ft. lbs., Step 2: 90

22 ft. lbs

Connecting Rod (Large End) Bearings — tightening sequence 1 stages

22 ft. lbs., Step 2: 90

22 ft. lbs

Connecting Rod (Large End) Bearings — tightening sequence 1 stages

22 ft. lbs., Step 2: 90

22 ft. lbs

Crankshaft Pulley and/or Damper Bolts — tightening sequence 1 stages

74 ft. lbs., step 2: 90

74 ft. lbs

Cylinder Head — tightening sequence 4 stages

1	30 ft. lbs.	30 ft. lbs
2	44 ft. lbs.	44 ft. lbs
3	90 degrees.	90 degrees
4	90 degrees.	90 degrees

Cylinder Head — tightening sequence 4 stages

1	30 ft. lbs.	30 ft. lbs
2	44 ft. lbs.	44 ft. lbs
3	90 degrees.	90 degrees
4	90 degrees.	90 degrees

Cylinder Head — tightening sequence 4 stages

1	30 ft. lbs.	30 ft. lbs
2	44 ft. lbs.	44 ft. lbs
3	90 degrees.	90 degrees
4	90 degrees.	90 degrees

Cylinder Head — tightening sequence 3 stages

Prep Do not reuse old bolts. Coat bolt head washers and threads with clean engine oil

1	30.0 ft. lbs.	30 ft. lbs
2	90 degrees	90 degrees
3	90 degrees	90 degrees

Cylinder Head — tightening sequence 4 stages

Prep Do not reuse old bolts. Coat bolt head washers and threads with clean engine oil

1	29.5 ft. lbs.	29.5 ft. lbs
2	44.2 ft. lbs.	44.2 ft. lbs
3	90 degrees	90 degrees
4	90 degrees	90 degrees

Engine Flywheel Bolts — tightening sequence 1 stages

44 ft. lbs., Step 2: 90

44 ft. lbs

Engine Flywheel Bolts — tightening sequence 1 stages

22 ft. lbs., Step 2: 44 ft. lbs., Step 3: 90

22 ft. lbs

Engine Flywheel Bolts — tightening sequence 1 stages

44 ft. lbs., Step 2: 90

44 ft. lbs

Engine Flywheel Bolts — tightening sequence 1 stages

44 ft. lbs., Step 2: 90

44 ft. lbs

Main Bearings — tightening sequence 1 stages

48 ft. lbs., Step 2: 90

48 ft. lbs

Main Bearings — tightening sequence 1 stages

48 ft. lbs., Step 2: 90

48 ft. lbs

Main Bearings — tightening sequence 1 stages

48 ft. lbs., Step 2: 90

48 ft. lbs

Main Bearings — tightening sequence 1 stages

22 ft. lbs., Step 2: 180

22 ft. lbs

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the engine oil and filter at 5,000 mi; spark plugs every 30,000 mi.

At 5,000 mi	Engine Oil (drain & refill) · Engine Oil Filter (replace) · Fuel Filter Water Separator (inspect) · Timing Belt (inspect)
Every 10,000 mi	Brake Shift Interlock Solenoid (inspect) · Brake System (inspect) · Cabin Air Filter (replace) · Engine Oil (drain & refill) · Engine Oil Filter (replace) · Fuel Filter Water Separator (inspect)
At 20,000 mi	Engine Oil (drain & refill) · Engine Oil Filter (replace)
Every 20,000 mi	Battery (inspect electrolyte level) · Door Stop (lubricate) · Engine Coolant System (leak inspection) · Transmission Assembly (inspect) · Universal Vehicle Operation (read dtcs) · Vacuum Line (inspect)
Every 30,000 mi	Spark Plugs (replace)
Every 40,000 mi	Accessory Drive Belt (inspect) · Axle Shaft Oil Seal (inspect) · CV Joint Boot (inspect) · Steering Linkage (inspect) · Timing Belt (inspect)
Every 60,000 mi	Timing Belt Idler Pulley (replace)

Reliability & federal safety record

Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.

Owner complaints about the 1998 Volkswagen Golf/GTI/Jetta top in one area — the electrical system, 3 of 19 reports (16%), well ahead of the next concern. None of this vehicle's 1 recall campaigns target the electrical system, so those reports read as owner-reported wear-and-tear rather than an acknowledged defect. 0 of the reports describe a crash and 0 a fire — a small share of the total, but worth weighing against the electrical system pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.

Open recalls

NHTSA campaigns

Service bulletins

Manufacturer communications

ODI investigations

Office of Defects Investigation

Owner complaints

0 involved a crash · 0 a fire

Owner complaints filed with NHTSA, by component

All 19 complaints on record, top 8 components.

Electrical System3

Power Train3

Engine & Engine Cooling3

Vehicle Speed Control1

Electrical System,Exterior Lighting1

Wheels1

Air Bags1

Electrical System,Visibility,Equipment1

Source: NHTSA Office of Defects Investigation complaint database.

Recalls NHTSA · verified

Showing 1 of 1 campaigns on record for this vehicle.

03V155000Equipment:Other:LabelsReported 22/04/2003

CERTAIN PASSENGER VEHICLES EQUIPPED WITH 2.8L VR6 ENGINES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THE RECOMMENDED COLD TIRE INFLATION PRESSURE… Remedy: OWNERS WILL BE PROVIDED WITH CORRECTED LABELS, OR A DEALER CAN INSTALL THE LABEL IF THE OWNER WISHES. OWNER NOTIFICATION BEGAN SEPTEMBER 29, 2003. OWNERS WHO TAKE THEIR VEHICLES…

Technical service bulletins NHTSA · verified

Showing 5 of 64 bulletins on record with NHTSA.

Bulletin	Date	Component	Summary
V171901201285565	2023-08-21	Engine And Engine Cooling	Update to Volkswagen engine oil standards
V171901201285562	2023-05-30	Engine And Engine Cooling	Volkswagen Engine oil quality standards, update to attachments.
V171901201285560	2023-04-24	Engine And Engine Cooling	Engine oil quality standards, update to attachments.
V941901201152119	2022-12-12	Equipment	Update model year applicability to include 2023.
V271901201189422	2022-12-06	Electrical System	Battery testing and charging using special tools VAS6161 & GRX3000VAS Charger. Updated to…

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420

Catalyst system efficiency below threshold — Bank 1

P0300

Random / multiple cylinder misfire detected

P0171

System too lean — Bank 1

P0455

Evaporative emission system leak detected — large leak

P0128

Coolant thermostat below regulating temperature

P0442

Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN

Decode a VIN to confirm the transmission and build data for a specific Golf/GTI/Jetta. OEM

Build data

Plant, GVWR class, engine and body data for any 17-character VIN.

Recalls

Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Group 47 battery Vehicles taking 4.2 qt Engine oil filter 06A115561B Engine air filter 1H0129620 Fuel filter 1H0201511A Spark plug 101000044AA

Reference guides

Cross-vehicle references for the kinds of data on this page.

Vehicle recalls & TSBs OBD-II trouble codes Torque specifications Maintenance schedules Fluid capacities & specs

Frequently asked

How much oil does the 1998 Golf/GTI/Jetta take?

4.2 qt of 5W-50, 10W-50 OR 10W-60 API SL, per the factory manual.

Does the 1998 Golf/GTI/Jetta have open recalls?

NHTSA lists 1 recall campaign(s) for this model year. Check your specific vehicle by VIN.

What gas mileage does the Golf/GTI/Jetta get?

EPA figures are 19 city / 26 highway / 22 combined mpg.

1998 Volkswagen Golf/GTI/Jetta

Quick specs

Fitment & sizes

OE service part numbers OEM · verified

Full specifications

Engine & drivetrain NHTSA vPIC

Ratings & economy EPA / vPIC

Service quick specs OEM factory data

Lubricants & capacities

Engine torques

Chassis torques

Ignition

Battery & A/C

Service checks

Brakes

Multi-step torque procedures OEM · verified

Factory maintenance schedule OEM · verified

Reliability & federal safety record

Owner complaints filed with NHTSA, by component

Recalls NHTSA · verified

Technical service bulletins NHTSA · verified

Common OBD-II trouble codes

VIN tools

Vehicles with shared specs

Reference guides

Related vehicles

Other years

Frequently asked