Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the engine oil and filter every 7,500 mi; coolant every 30,000 mi. The big-interval services (every 30,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.
| Every 7,500 mi | Accessory Drive Belt (inspect) · Axle Shaft Oil Seal (inspect) · Brake Linings (inspect) · CV Joint Boot (inspect) · Cabin Air Filter (replace) · Engine Oil (drain & refill) |
| Every 15,000 mi | Body Fasteners (torque) · Body Latches, Locks & Hinges (inspect) · Brake Line (inspect) · Engine Coolant System Hoses (inspect) · Exhaust System (Complete) (inspect) · Frame Fasteners (torque) |
| Every 22,500 mi | PCV System (inspect) |
| Every 30,000 mi | Brake Hydraulic System (drain, refill & bleed) · Engine Air Filter Element (replace) · Engine Coolant System (drain, flush & refill) · Fuel Evaporative Canister Filter (inspect) · Fuel Filter (replace) |