Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the engine oil and filter every 7,500 mi; coolant every 30,000 mi. The big-interval services (every 30,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.
| At 7,500 mi | Drive Axle Assembly (drain & refill) · Parking Brake System (inspect) · Transmission Assembly (inspect fluid level) |
| Every 7,500 mi | Body Latches, Locks & Hinges (inspect) · Brake Line (inspect) · Brake System (inspect) · CV Joint Boot (inspect) · Driveshaft (inspect) · Engine Oil (drain & refill) |
| At 8,000 mi | Brake Drum Assembly (inspect) |
| At 15,000 mi | Cabin Air Filter (inspect) |
| Every 15,000 mi | Brake Drum Assembly (inspect) · Brake Hydraulic System (inspect fluid level) · Brake Pedal Assembly (inspect) · Clutch Master Cylinder (inspect fluid level) · Clutch Pedal Assembly (inspect) · Differential (inspect fluid level) |
| At 30,000 mi | Differential (inspect fluid level) |
| Every 30,000 mi | Accessory Drive Belt (inspect) · Cabin Air Filter (inspect) · Cabin Air Filter (replace) · Engine Air Filter Element (replace) · Engine Coolant System (drain, flush & refill) · Engine Coolant System Hoses (inspect) |
| Every 45,000 mi | Transmission Oil Cooler Line (inspect) |
| At 60,000 mi | Fuel Evaporative Emission Control System Lines (inspect) |