Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the engine oil and filter every 7,500 mi; spark plugs every 60,000 mi; coolant every 30,000 mi. The big-interval services (every 30,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.
| At 7,500 mi | Brake Line (inspect) · Brake Linings (inspect) · Brake Rotor (inspect) · Drive Axle Assembly (drain & refill) · Parking Brake System (inspect) · Transfer Case Assembly (inspect fluid level) |
| Every 7,500 mi | Body Latches, Locks & Hinges (inspect) · CV Joint Boot (inspect) · Driveshaft (inspect) · Engine Oil (drain & refill) · Engine Oil Filter (replace) · Steering System (inspect) |
| Every 15,000 mi | Brake Line (inspect) · Brake Linings (inspect) · Brake Pedal Assembly (inspect) · Brake Rotor (inspect) · Clutch Master Cylinder (inspect fluid level) · Clutch Pedal Assembly (inspect) |
| Every 30,000 mi | Accessory Drive Belt (inspect) · Cabin Air Filter (replace) · Engine Air Filter Element (replace) · Engine Coolant System (drain, flush & refill) · Exhaust System (Complete) (inspect) · Fuel Line (inspect) |
| Every 45,000 mi | Engine Coolant System (drain, flush & refill) |
| At 60,000 mi | Transfer Case Assembly (inspect fluid level) |
| Every 60,000 mi | Brake Hydraulic System (drain, refill & bleed) · Engine Valves (inspect valve lash) · Fuel Evaporative Emission Control System Lines (inspect) · Spark Plugs (replace) · Transfer Case Assembly (drain & refill) |
| At 90,000 mi | Engine Coolant System (drain, flush & refill) · Transmission Assembly (inspect fluid level) |
| At 150,000 mi | Fuel Evaporative Canister Filter (replace) · Fuel Filter (replace) |