Subaru›XT (4eAT)›1990›Overview/subaru/xt-4eat/1990/base/

1990 Subaru XT (4eAT)

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 1990 XT (4eAT).

The 1990 Subaru XT (4eAT) takes 4.2 qt of 5W-30 engine oil.

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity4.2 qtOEM · verified

Engine oil type5W-30 APIOEM · verified

Engine, drivetrain, dimensions and economy.

Overall length	177.6 in
Overall width	66.5 in
Overall height	52.8 in
Wheelbase	97.2 in
Curb weight	2414 lb
Weight distribution (front / rear)	61/39

Capacities, torques and tune-up values from the factory service manual.

This engine holds 4.2 qt of 5W-30 API engine oil, DOT 3 brake fluid.

Brake Fluid	DOT 3
Engine Coolant	ETHYLENE GLYCOL
Engine Oil	5W-30 · API
Engine Oil Capacity	4.2 qt
Engine Oil	5W-30 · API
Engine Oil Capacity	4.2 qt
Transfer Case Fluid	80W-90 · GL-5
Transfer Case Fluid Capacity	2.5 Pints

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the engine oil and filter at 3,000 mi.

At 3,000 mi	Engine Oil (drain & refill)
At 7,500 mi	Engine Oil Filter (replace)
Every 7,500 mi	Engine Oil (drain & refill)
Every 15,000 mi	Body Latches, Locks & Hinges (inspect) · Brake System (inspect) · Clutch Assembly (inspect) · Engine Coolant System (leak inspection) · Engine Oil Filter (replace) · Hill Holder System (inspect)
Every 30,000 mi	Brake Drum Assembly (inspect) · Brake Hydraulic System (drain, refill & bleed) · Brake Power Booster Unit (inspect) · Differential (inspect fluid level) · Engine Air Filter Element (replace) · Engine Breather Filter (replace)
Every 60,000 mi	Accessory Drive Belt (inspect) · Timing Belt (replace) · Wheel Bearing (inspect)