Subaru›RX›1989›Overview/subaru/rx/1989/base/

1989 Subaru RX

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 1989 RX.

The 1989 Subaru RX takes 4.2 qt of 5W-30 engine oil.

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity4.2 qtOEM · verified

Engine oil type5W-30 APIOEM · verified

Engine, drivetrain, dimensions and economy.

Capacities, torques and tune-up values from the factory service manual.

This engine holds 4.2 qt of 5W-30 API engine oil, DOT 3 brake fluid.

Brake Fluid	DOT 3
Engine Coolant	ETHYLENE GLYCOL
Engine Oil	5W-30 · API
Engine Oil Capacity	4.2 qt
Power Steering Fluid	ATF
Transfer Case Fluid	80W-90 · GL-5
Transfer Case Fluid Capacity	2.5 Pints

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the engine oil and filter at 3,000 mi.

At 3,000 mi	Engine Oil (drain & refill) · Engine Oil Filter (replace)
Every 7,500 mi	Engine Oil (drain & refill) · Engine Oil Filter (replace)
Every 15,000 mi	Body Latches, Locks & Hinges (inspect) · Brake System (inspect) · Clutch Assembly (inspect) · Engine Coolant System (leak inspection) · Hill Holder System (inspect) · Power Steering System (inspect)
Every 30,000 mi	Accessory Drive Belt (inspect) · Brake Drum Assembly (inspect) · Brake Hydraulic System (drain, refill & bleed) · Brake Power Booster Unit (inspect) · Differential (inspect fluid level) · Engine Air Filter Element (replace)
Every 60,000 mi	Wheel Bearing (inspect)