SubaruBRZ (6AT)2014Overview/subaru/brz-6at/2014/base/

2014 Subaru BRZ (6AT)

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2014 BRZ.

Body PASSENGER CARTransmission Automatic (S6)

The 2014 Subaru BRZ equipped with the S6 automatic transmission is a passenger car characterized by its focused mechanicals, delivering an EPA-estimated 28 combined mpg—24 city and 33 highway—while its engine requires 5.7 quarts of 0W-20 API oil. In the context of the model's complaint history spanning 2013 to 2024, this year represents a dramatic stabilization following the 63-complaint launch, dropping to just six total owner complaints centered on the engine alongside zero recalls. Although not the absolute statistical low that would arrive in 2018 with a single complaint, the 2014 model stands as a quickly resolved and notably reliable early chapter in the platform's lifespan.

Model year202520242023202220202019201820172014

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity5.7 qtOEM · verified
Engine oil type0W-20 APIOEM · verified
Lug nut torque89 ft-lbsOEM · verified
EPA fuel economy24/33/28 mpgEPA · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses a BCI 35 · 550 CCA battery. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Battery groupBCI 35 · 550 CCAOEM · verified
Tail / brake / turnTRLYOEM · verified

Full specifications

Engine, drivetrain, dimensions and economy.

Engine & drivetrain NHTSA vPIC

TransmissionAutomatic (S6)

Dimensions & weight NHTSA vPIC

Overall length166.9 in
Overall width70.1 in
Overall height50.4 in
Wheelbase101.2 in
Curb weight2822 lb
Track (front / rear)59.8 / 60.6 in
Weight distribution (front / rear)55/45

Ratings & economy EPA / vPIC

EPA city / highway / combined24 / 33 / 28 mpg
DrivetrainRear-Wheel Drive
Recommended fuelPremium Gasoline

Performance & power Independent road tests

0–60 mph, quarter-mile, horsepower and torque from independent road tests.

Independent road tests for the BRZ of this era, listed by trim and engine — this page spans more than one engine, so no single horsepower figure is shown.

5.4–7.7 sec0–60 mph (tested)quickest 5.40 sec — 2023 Limited
YearTrim / engine0–60¼ mileHPDrivetrain
2013Limited 2.0L F-46.30 sec14.90 sec200 hpRWD
2013Limited 2.0L F-46.40 sec14.90 sec200 hpRWD
2013Limited 2.0L F-46.40 sec14.90 sec200 hpRWD
2013Limited 2.0L F-46.40 sec15.00 sec200 hpRWD
2013Premium 2.0L F-46.40 sec15.00 sec200 hpRWD
2013Limited 2.0L F-47.50 sec15.80 sec200 hpRWD
2013Limited 2.0L F-47.70 sec15.90 sec200 hpRWD
2013Limited 2.0L F-47.70 sec15.90 sec200 hpRWD

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine holds 5.7 qt of 0W-20 API engine oil, 75W-85 · 75W-90 · GL-5 in the differential, DOT 3 brake fluid. Torque lug nuts to 89 ft-lbs, the oil drain plug to 33.0 ft-lbs. The firing order is 1-3-2-4. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.

Lubricants & capacities

Automatic Transmission FluidATF
Automatic Transmission Fluid Capacity7.9
Brake FluidDOT 3
Differential Gear Oil75W-85 · 75W-90 · GL-5
Differential Gear Oil Capacity2.43 qt
Engine Oil0W-20 · API
Engine Oil Capacity5.7 qt
Manual Transmission Fluid75W-90 · GL-3

Engine torques

Camshaft Bearing/Carrier Cap Bolts or Studs13 ft-lbs
Crankshaft Pulley and/or Damper Bolts15 ft-lbs
Intake Manifold to Engine Bolts18.4 ft-lbs
Exhaust Manifold to Cylinder Head Bolts22 ft-lbs
Engine Oil Pan Drain Plug33.0 ft-lbs

Chassis torques

Lug Nuts89 ft-lbs
Rear Wheel Hub140 ft-lbs

Ignition

Cylinder Firing Order1-3-2-4
Curb Idle Speed (No Load)TURBO: 700 rpm
Curb Idle Speed Variance (No Load)100 rpm

Battery & A/C

RefrigerantR134a
Refrigerant Capacity1.00-1.10 lbs
Oil TypeDens Oil 8
Oil Capacity2.4 oz
Standard BCI Group Number35
Standard BCI Cranking Performance550 cca

Service checks

Injector Primary Resistance2.1 Turbo ohms
Engine Compression167-254 psi. 29 variance psi.

Brakes

Brake ApplicationWITH SOLID ROTOR / WITH VENTED ROTOR
Torque Caliper to Bracket48.7 ft-lbs / 59 ft-lbs
Minimum Pad ThicknessFront: 0.059; Rear: 0.059 in
Brake ApplicationWITH SOLID ROTOR / WITH VENTED ROTOR
Rotor Runout Limit0.002 in
Rotor Nominal Thickness From0.394 in / 0.709 in / 0.945 in
Rotor Nominal Thickness To0.394 in / 0.709 in / 0.945 in
Rotor Discard at or Under0.335 in / 0.63 in / 0.866 in

Multi-step torque procedures OEM · verified

Connecting Rod (Large End) Bearings — tightening sequence 1 stages
17.4 ft. lbs., Step 2: 167.4 ft. lbs
Cylinder Head — tightening sequence 8 stages

Prep MFI and SFI

121.4 ft. lbs.21.4 ft. lbs
273.8 ft. lbs.73.8 ft. lbs
3Loosen 180 degrees in the reverse order of installing.180 degrees
4Loosen 180 degrees in the reverse order of installing.180 degrees
531 ft. lbs.31 ft. lbs
678-82 degrees.78–82 degrees
7Bolts 1, 273–77 degrees
86, 5, 4, 328–32 degrees
Engine Flywheel Bolts — tightening sequence 1 stages
122 ft. lbs., Step 2: 30-3522 ft. lbs

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the engine oil and filter every 1,200 mi; spark plugs every 60,000 mi.

Every 1,200 miEngine Oil (inspect fluid level)
Every 6,000 miAccessory Drive Belt (inspect) · Body Latches, Locks & Hinges (lubricate) · CV Joint Boot (inspect) · Differential (inspect fluid level) · Engine Oil Filter (replace) · Exterior Lighting (inspect)
Every 12,000 miBrake System (inspect) · Engine Air Filter Element (inspect) · Engine Coolant System (inspect fluid level) · Engine Coolant System Hoses (inspect)
Every 15,000 miBrake Line (inspect) · Brake Linings (inspect) · Brake Rotor (inspect) · Cabin Air Filter (replace) · Clutch Assembly (inspect) · Power Steering System (inspect)
At 30,000 miTransmission Assembly (inspect fluid level)
Every 30,000 miFuel Line (inspect) · Transmission Assembly (inspect fluid level)
Every 36,000 miBattery (inspect) · Brake Hydraulic System (drain, refill & bleed) · Fuel Evaporative Emission Control System Lines (inspect) · Fuel Injector (inspect) · PCV Valve (inspect) · Parking Brake System (inspect)
Every 60,000 miDrive Axle Assembly (drain & refill) · Spark Plugs (replace) · Transmission Assembly (inspect fluid level) · Wheel Bearing (inspect)
Every 75,000 miFuel Filter (replace)

Reliability & federal safety record

Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.

Owner complaints about the 2014 Subaru BRZ (6AT) dominate in one area — the engine, 3 of 6 reports (50%), well ahead of the next concern. NHTSA has issued no recalls for this vehicle, so these are owner-reported concerns only. 0 of the reports describe a crash and 1 a fire — a small share of the total, but worth weighing against the engine pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.

0
Open recalls
NHTSA campaigns
239
Service bulletins
Manufacturer communications
0
ODI investigations
Office of Defects Investigation
6
Owner complaints
0 involved a crash · 1 a fire
NHTSA crash-test rating federal NCAP · out of 5 stars
Overall★★★★★
Frontal★★★★
Side★★★★★
Rollover★★★★★
Owner complaints by model year NHTSA · this generation & adjacent

Owner complaints filed with NHTSA, by component

All 6 complaints on record, top 4 components.

Engine3
Engine,Fuel/Propulsion System1
Power Train,Engine1
Fuel System, Gasoline1

Source: NHTSA Office of Defects Investigation complaint database.

Recalls NHTSA · verified

No recall campaigns on record with NHTSA for this vehicle as of the last data refresh.

Technical service bulletins NHTSA · verified

Showing 5 of 239 bulletins on record with NHTSA.

BulletinDateComponentSummary
SubaruNet Annoucement (E2026-06-11Unknown Or OtherThis announcement is requesting retailer staff to retain the EyeSight protective hood…
01-167-08R2026-05-18Unknown Or OtherThis bulletin contains additional information for recommended materials listed in the…
SubaruNet Announcement (R2026-05-04Power TrainThis announcement provides information on the remanufactured CVT transmission program.
15-337-262026-04-30Electrical SystemThis bulletin announces the design change made to the front speaker assembly which have…
07-240-26R2026-04-30Unknown Or OtherThis Service Information Bulletin was developed to provide interim guidance for vehicles…

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420
Catalyst system efficiency below threshold — Bank 1
P0300
Random / multiple cylinder misfire detected
P0171
System too lean — Bank 1
P0455
Evaporative emission system leak detected — large leak
P0128
Coolant thermostat below regulating temperature
P0442
Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN
Decode a VIN to confirm the transmission and build data for a specific BRZ. OEM
Build data
Plant, GVWR class, engine and body data for any 17-character VIN.
Recalls
Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Reference guides

Cross-vehicle references for the kinds of data on this page.

Frequently asked

How much oil does the 2014 BRZ take?

5.7 qt of 0W-20 API SN, per the factory manual.

Does the 2014 BRZ have open recalls?

NHTSA lists 0 recall campaign(s) for this model year. Check your specific vehicle by VIN.

What gas mileage does the BRZ get?

EPA figures are 24 city / 33 highway / 28 combined mpg.