OldsmobileNinety Eight1993Overview/oldsmobile/ninety-eight/1993/base/

1993 Oldsmobile Ninety Eight

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 1993 Ninety Eight.

Transmission Automatic 4-spd

The 1993 Oldsmobile Ninety Eight is EPA-rated at 17/25/20 mpg city/highway/combined.

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

EPA fuel economy17/25/20 mpgEPA · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses OE oil filter 12731175. Note the factory front wiper blades and serpentine belt are now discontinued — plan on a superseded or quality aftermarket equivalent, which the part pages below list where known. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

OE service part numbers OEM · verified

Engine oil filter12731175
Engine air filter19259030
Fuel filter25121468
Spark plug19354417
Front wiper blades25689175 discontinued
Serpentine belt10230725 discontinued · alt 24503513
Thermostat24505924 alt 24506985

Full specifications

Engine, drivetrain, dimensions and economy.

Engine & drivetrain NHTSA vPIC

TransmissionAutomatic 4-spd

Ratings & economy EPA / vPIC

EPA city / highway / combined17 / 25 / 20 mpg
DrivetrainFront-Wheel Drive
Passenger volume109 cu ft
Cargo volume20 cu ft
Recommended fuelRegular Gasoline

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

Lubricants & capacities

Engine CoolantETHYLENE GLYCOL

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the engine oil and filter at 7,500 mi; coolant every 30,000 mi. The big-interval services (every 30,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.

At 7,500 miEngine Oil Filter (replace) · Throttle Body (torque) · Tire & Wheel Assembly (rotate)
Every 7,500 miBody Latches, Locks & Hinges (inspect) · Engine Oil (drain & refill) · Parking Brake Cable (lubricate) · Shift Linkage (inspect) · Steering Linkage (inspect) · Steering System (inspect)
Every 15,000 miEngine Oil Filter (replace) · Tire & Wheel Assembly (rotate)
Every 30,000 miAccessory Drive Belt (inspect) · Engine Air Filter Element (replace) · Engine Breather Filter (replace) · Engine Coolant System (drain, flush & refill) · Fuel Line (inspect) · Fuel Tank (inspect)
Every 60,000 miPCV System (inspect)
Every 100,000 miTransmission Fluid & Filter (replace)

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420
Catalyst system efficiency below threshold — Bank 1
P0300
Random / multiple cylinder misfire detected
P0171
System too lean — Bank 1
P0455
Evaporative emission system leak detected — large leak
P0128
Coolant thermostat below regulating temperature
P0442
Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN
Decode a VIN to confirm the transmission and build data for a specific Ninety Eight. OEM
Build data
Plant, GVWR class, engine and body data for any 17-character VIN.
Recalls
Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Reference guides

Cross-vehicle references for the kinds of data on this page.

Frequently asked

What gas mileage does the Ninety Eight get?

EPA figures are 17 city / 25 highway / 20 combined mpg.