Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2018 Micra.
Engine, drivetrain, dimensions and economy.
| Overall length | 150.8 in |
| Overall width | 65.7 in |
| Overall height | 60.2 in |
| Wheelbase | 96.5 in |
| Curb weight | 2302 lb |
| Track (front / rear) | 57.5 / 57.9 in |
| Weight distribution (front / rear) | 59/41 |
Capacities, torques and tune-up values from the factory service manual.
Torque the oil drain plug to 25.0 ft-lbs. The firing order is 1-3-4-2.
| Crankshaft Position (CKP) Sensor Bolt(s) | 5.1 ft-lbs |
| Camshaft Position (CMP) Sensor Bolt(s) | 5.1 ft-lbs |
| Camshaft Sprocket and/or Gear Bolt(s) | 58.0 ft-lbs |
| Engine Coolant Temperature (ECT) Sensor Bolt(s) | 18.0 ft-lbs |
| Engine Flywheel Bolts | 80 ft-lbs |
| Engine Flywheel Bolts | 80.0 ft-lbs |
| Engine Oil Pan Drain Plug | 25.0 ft-lbs |
| Oil Pump to Cylinder BLock Bolts/Studs | 18 ft-lbs |
| Cylinder Firing Order | 1-3-4-2 |
| RPM | 73.0 |
| 1 | 14 ft. lbs., Step 2: 60 | 14 ft. lbs |
| 1 | 20.0 ft. lbs. | 20 ft. lbs |
| 2 | Back off 360.0 degrees | 360 degrees |
| 3 | 14.0 ft. lbs. | 14 ft. lbs |
| 4 | 60.0 | |
| 1 | 26.0 ft. lbs., Step 2: 60 | 26 ft. lbs |
| 1 | 24 ft. lbs., Step 2: 60 | 24 ft. lbs |
| 1 | 24.0 ft. lbs. | 24 ft. lbs |
| 2 | 60.0 | |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Cross-vehicle references for the kinds of data on this page.