Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the engine oil and filter every 3,750 mi; spark plugs at 105,000 mi; coolant every 3,750 mi. The big-interval services (every 3,750 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.
| Every 3,750 mi | Accessory Drive Belt (inspect) · Brake Hydraulic System (inspect fluid level) · Clutch Master Cylinder (inspect fluid level) · Differential (inspect fluid level) · Engine Coolant System Hoses (inspect) · Engine Oil (drain & refill) |
| Every 7,500 mi | Battery (inspect) · Brake System (inspect) · CV Joint Boot (inspect) · Driveshaft (inspect) · Exhaust System (Complete) (inspect) · Steering Gear Box Assembly (inspect) |
| Every 15,000 mi | Accessory Drive Belt (inspect) · Air Conditioning System (inspect) · Body Latches, Locks & Hinges (lubricate) · Brake Line (inspect) · Brake Linings (inspect) · Brake Rotor (inspect) |
| Every 30,000 mi | Drive Axle Assembly (drain & refill) · Drive Belt (replace) · Engine Coolant System (drain, flush & refill) · Fuel Evaporative Emission Control System (inspect) · Fuel Evaporative Emission Control System Lines (inspect) · Fuel Line (inspect) |
| At 60,000 mi | Accessory Drive Belt (inspect) · Engine Coolant System (drain, flush & refill) |
| Every 60,000 mi | Radiator Hose (replace) |
| At 105,000 mi | Spark Plugs (replace) |