Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2010 John Cooper Works Clubman.
The 2010 Mini John Cooper Works Clubman. It takes 4.4 qt of 5W-30 engine oil and is EPA-rated at 25/33/28 mpg city/highway/combined.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI L1 · 480 CCA battery, OE oil filter 11428643758. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11428643758 alt 11427622446 |
| Engine air filter | 13717568728 alt 13717561235 |
| Fuel filter | 11252754870 |
| Spark plug | 12120035531 alt 12122158165 |
| Battery | 61217575326 alt 61217571896 |
| Front wiper blades | 61610028137 |
| Thermostat | 11518613803 alt 11518613804 |
| Cabin air filter | 64319127516 |
Engine, drivetrain, dimensions and economy.
| Transmission | Manual 6-spd |
| Overall length | 155.9 in |
| Overall width | 66.1 in |
| Overall height | 56.3 in |
| Wheelbase | 100.4 in |
| Curb weight | 2895 lb |
| Track (front / rear) | 56.7 / 57.1 in |
| Weight distribution (front / rear) | 59/41 |
| EPA city / highway / combined | 25 / 33 / 28 mpg |
| Drivetrain | Front-Wheel Drive |
| Recommended fuel | Premium Gasoline |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 4.4 qt of 5W-30 engine oil, DOT 4 brake fluid. Torque lug nuts to 103 ft-lbs, the oil drain plug to 23.0 ft-lbs. The firing order is 1-3-4-2. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Automatic Transmission Fluid | With CVT: BMW part number 83220136376 |
| Brake Fluid | DOT 4 |
| Engine Coolant | ETHYLENE GLYCOL |
| Engine Oil | SYNTHETIC · 5W-30 |
| Engine Oil Capacity | 4.4 qt |
| Manual Transmission Fluid Capacity | 3.6-4.0 |
| Power Steering Fluid | Use Pentosin CHF 11S |
| Power Steering Fluid | USE BMW PART NO. 82110148132 PENTOSIN CHF11S |
| Camshaft Bearing/Carrier Cap Bolts or Studs | 6 ft-lbs |
| Intake Manifold to Engine Bolts | Bolts: 11, nuts: 15 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 18.4 ft-lbs |
| Intake Manifold to Engine Bolts | Bolts: 11, nuts: 15 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 18.4 ft-lbs |
| Intake Manifold to Engine Bolts | Bolts: 11, nuts: 15 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 18.4 ft-lbs |
| Engine Oil Pan Drain Plug | 23.0 ft-lbs |
| Lug Nuts | 103 ft-lbs |
| Cylinder Firing Order | 1-3-4-2 |
| Curb Idle Speed (No Load) | 770 rpm |
| Curb Idle Speed Variance (No Load) | 50 rpm |
| Spark Plug Manufacturer | BMW |
| Spark Plug Gap | Not adjustable in |
| Spark Plug Torque | 14.8-19.2 ft-lbs |
| Refrigerant | R134a |
| Standard BCI Group Number | L1 |
| Standard BCI Cranking Performance | 480 cca |
| Optional BCI Group Number | 47 |
| Optional BCI Cranking Performance | 480 cca |
| Pressure Test | 22 psi |
| Radiator Cap Pressure Relief | 18-22 psi |
| Engine Compression | 116-174 PSI. 43 maximum variation. psi |
| Torque to Knuckle | 81 ft-lbs |
| Brake Application | WITH FN3 |
| Torque Caliper to Bracket | 26 ft-lbs |
| Torque to Knuckle | 81 ft-lbs |
| Minimum Pad Thickness | Front: 0.118; Rear: 0.0118 in |
| Rotor Nominal Thickness From | 0.394 in / 0.866 in / 0.945 in |
| Rotor Nominal Thickness To | 0.394 in / 0.866 in / 0.945 in |
| Rotor Minimum Machining | 0.031 in |
| 1 | 4 ft. lbs., Step 2: 11 ft. lbs., Step 3: 130 | 4 ft. lbs |
| 1 | 22 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | 90 | |
| 1 | 22 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | 90 | |
| 1 | 22 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | 90 | |
| 1 | 6 ft. lbs., Step 2: 22 ft. lbs., Step 3: 90 | 6 ft. lbs |
| 1 | 37 ft. lbs., Step 2: 100 | 37 ft. lbs |
This vehicle uses condition-based service — it signals maintenance needs through its onboard service indicator rather than fixed mileage intervals. Items on the factory schedule:
| Replace | Engine Oil Filter · Engine Oil |
| Inspect | Brake Linings |
| Inspect All Fluid Levels | Universal Vehicle Operation |
| Drain, Refill & Bleed | Brake Hydraulic System |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
4.4 qt of USE MINI SYNTHETIC 5W-30 MOTOR OIL, per the factory manual.
EPA figures are 25 city / 33 highway / 28 combined mpg.