MercuryGrand Marquis1995Overview/mercury/grand-marquis/1995/base/

1995 Mercury Grand Marquis

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 1995 Grand Marquis.

Body PASSENGER CARTransmission Automatic 4-spd

The 1995 Mercury Grand Marquis is a passenger car paired with a four-speed automatic transmission, an engine that takes 5.0 quarts of 5W-20 API oil, and EPA ratings of 15/23/18 mpg. Within the model’s 1990–2011 complaint history, this model year generated 216 owner complaints and seven recalls, with the top reported concern categorized as Service Brakes, Hydraulic. That complaint volume sits well below the 2005 peak of 487 yet far above the 2011 low of nine, placing the 1995 Grand Marquis in the lower-middle range of the nameplate’s long-term reliability record.

Model year201120102009200820072006200520041995

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity5.0 qtOEM · verified
Engine oil type5W-20 APIOEM · verified
Lug nut torque85-105 ft-lbsOEM · verified
EPA fuel economy15/23/18 mpgEPA · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses a BCI 58 · 540 CCA battery. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Battery groupBCI 58 · 540 CCAOEM · verified
Tire sizeP225-60R16OEM · verified
Wheel / rim6.5-JJ inOEM · verified

Full specifications

Engine, drivetrain, dimensions and economy.

Engine & drivetrain NHTSA vPIC

TransmissionAutomatic 4-spd

Dimensions & weight NHTSA vPIC

Overall length212.2 in
Overall width78 in
Overall height56.7 in
Wheelbase114.6 in
Curb weight3785 lb
Track (front / rear)63.4 / 64.2 in
Weight distribution (front / rear)55/45

Ratings & economy EPA / vPIC

EPA city / highway / combined15 / 23 / 18 mpg
DrivetrainRear-Wheel Drive
Passenger volume109 cu ft
Cargo volume20 cu ft
Recommended fuelRegular Gasoline

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine holds 5.0 qt of 5W-20 API engine oil, DOT 3 brake fluid. Torque lug nuts to 85-105 ft-lbs, the oil drain plug to 19.0 ft-lbs. The firing order is 1-3-7-2-6-5-4-8. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.

Lubricants & capacities

Brake FluidDOT 3
Engine CoolantETHYLENE GLYCOL
Engine OilSYNTHETIC · 5W-20 · API
Engine Oil Capacity5.0 qt

Engine torques

Engine Coolant Temperature (ECT) Sensor Bolt(s)12.0-17.0 ft-lbs
Oxygen (O2S) Sensor Bolt(s)27.0-30.0 ft-lbs
Intake Manifold to Engine Bolts18.0 ft-lbs
Exhaust Manifold to Cylinder Head Bolts18.0 ft-lbs
Oil Pan to Block Bolts15.0-22.0 ft-lbs
Engine Oil Pan Drain Plug8.0-12.0 ft-lbs
Engine Oil Pan Drain Plug19.0 ft-lbs

Chassis torques

Lug Nuts85-105 ft-lbs
Front Wheel Hub221 ft-lbs
Rear Wheel Hub250 ft-lbs

Ignition

Cylinder Firing Order1-3-7-2-6-5-4-8
Spark Plug ManufacturerMotorcraft
Spark Plug Gap0.052-0.056 in
Spark Plug Torque11.0 ft-lbs
Ignition Timing10, Not adjustable degrees
Ignition Timing Acceptable Variance2 degrees
Ignition Timing Reference RPMIdle rpm

Battery & A/C

RefrigerantR134a
Refrigerant Capacity2.13 lbs
Oil GroupPAG
Oil TypeYN-12-D
Oil Capacity7.00 oz
Standard BCI Group Number58
Standard BCI Cranking Performance540 cca
Optional BCI Group Number65

Service checks

Pressure Test16 psi
Radiator Cap Pressure Relief16 psi
Thermostat Opening Temperature196 °F

Brakes

Torque to Knuckle19-25 ft-lbs
Minimum Pad ThicknessFront: 0.125; Rear: 0.125 in
Minimum Shoe Thickness0.030
Rotor Max Parallel Variation0.00035 in / 0.0005 in
Rotor Runout Limit0.002 in
Rotor Nominal Thickness From1.024 in / 0.5 in
Rotor Nominal Thickness To1.024 in / 0.5 in
Rotor Minimum Machining0.974 in / 0.44 in

Multi-step torque procedures OEM · verified

Cylinder Head — tightening sequence 6 stages

Prep Do not reuse old bolts. Coat bolt threads with clean engine oil.

130.0 ft. lbs.30 ft. lbs
290 degrees90 degrees
3Loosen bolts 360 degrees360 degrees
430.0 ft. lbs.30 ft. lbs
590 degrees90 degrees
690 degrees90 degrees

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the engine oil and filter every 5,000 mi; coolant every 30,000 mi. The big-interval services (every 30,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.

At 5,000 miTire & Wheel Assembly (rotate)
Every 5,000 miEngine Oil (drain & refill) · Engine Oil Filter (replace)
Every 10,000 miTire & Wheel Assembly (rotate)
Every 15,000 miEngine Coolant System (leak inspection) · Steering Linkage (inspect) · Suspension System (inspect)
Every 30,000 miBrake Linings (inspect) · Engine Air Filter Element (replace) · Engine Coolant System (drain, flush & refill) · Exhaust System Heat Shield (inspect) · Transmission Assembly (drain & refill)
At 50,000 miEngine Coolant System (drain, flush & refill)
Every 60,000 miAccessory Drive Belt (inspect) · PCV Valve (replace)
Every 100,000 miDrive Axle Assembly (drain & refill)

Reliability & federal safety record

Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.

The 1995 Mercury Grand Marquis occupies a high-activity point within the provided federal record, situated in a sustained period of elevated complaints and investigations from 1992 through 1997. Although consumer complaints dipped slightly to 216 from 226 in 1994, official recalls more than doubled to 7 and Technical Service Bulletins jumped significantly to 116. This surge in administrative actions distinguishes 1995 from the quieter 1990-1991 period and precedes the complaint peaks seen in 1996 and 1997. Reported problems for this specific year concentrate on Service Brakes, Hydraulic with 30 instances, Vehicle Speed Control with 21, and Steering with 20, alongside 22 crash-related complaints. The data implies that while consumer dissatisfaction stabilized slightly, regulatory intervention intensified markedly compared to the immediate prior years. Prospective buyers should consider that this model year carries a higher burden of recalls and service bulletins than the 1994 model, making it a less favorable choice within this generation.

7
Open recalls
NHTSA campaigns
116
Service bulletins
Manufacturer communications
6
ODI investigations
Office of Defects Investigation
216
Owner complaints
22 involved a crash · 5 a fire
NHTSA crash-test rating federal NCAP · out of 5 stars
Rollover★★★★★
Owner complaints by model year NHTSA · this generation & adjacent

Owner complaints filed with NHTSA, by component

All 216 complaints on record, top 8 components.

Service Brakes, Hydraulic30
Vehicle Speed Control21
Steering20
Visibility19
Electrical System18
Exterior Lighting12
Suspension12
Power Train12

Source: NHTSA Office of Defects Investigation complaint database.

Recalls NHTSA · verified

Showing 2 of 7 campaigns on record for this vehicle.

15E082000SteeringReported 06/10/2015

Dorman Products, Inc. (Dorman) is recalling certain model Dorman Steering Shafts, part number 425-359, Solutions Steering Shafts, part number 7-0359, and OE Solutions Steering Shafts, part number 425-359, manufactured… Remedy: Dorman will notify owners, and dealers will replace the steering shaft, free of charge. The recall began on October 28, 2015. Owners may contact Dorman customer service at…

08V051000Vehicle Speed Control:Cruise ControlReported 04/02/2008

FORD IS RECALLING 225,000 MY 1992-2003 ECONOLINE, MY 1993-1995 TAURUS SHO, MY 1992-1998 CROWN VICTORIA, MY 1993 BRONCO, F-SERIES, MY 1995-1997 F-SERIES SUPER DUTY STRIPPED CHASSIS, MY 1992-1998 MERCURY GRAND MARQUIS… Remedy: DEALERS WILL INSTALL A NEW WIRING HARNESS, OR REPLACE THE MATING ELECTRICAL COMPONENT. THE RECALL BEGAN ON FEBRUARY 18, 2008. OWNERS MAY CONTACT FORD AT 1-800-392-3673.

Technical service bulletins NHTSA · verified

Showing 5 of 116 bulletins on record with NHTSA.

BulletinDateComponentSummary
CSP 08B042008-05-15Fuel System, GasolineFORD/LINCOLN MERCURY: CERTAIN 1992-2001 MODEL YEAR CROWN VICTORIA, GRAND MARQUIS, AND…
031812003-09-15Electrical SystemREMOTE KEYLESS ENTRY (RKE) - SERVICE TIPS. *TT
031482003-07-21Power TrainNEW TRANSMISSION COOLER FLUSHER - SERVICE TIPS. 2003 ESCORT AND SUPER DUTY F SERIES…
032612003-01-05Power TrainNEW SERVICE PART - NUMBER 5 NEEDLE BEARING AND RACE KIT - 4R70W TRANSMISSION - SERVICE…
022082002-10-14EquipmentCLIMATE CONTROL A/C SERVICE TECH TIPS. *EH

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420
Catalyst system efficiency below threshold — Bank 1
P0300
Random / multiple cylinder misfire detected
P0171
System too lean — Bank 1
P0455
Evaporative emission system leak detected — large leak
P0128
Coolant thermostat below regulating temperature
P0442
Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN
Decode a VIN to confirm the transmission and build data for a specific Grand Marquis. OEM
Build data
Plant, GVWR class, engine and body data for any 17-character VIN.
Recalls
Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Reference guides

Cross-vehicle references for the kinds of data on this page.

Frequently asked

How much oil does the 1995 Grand Marquis take?

5.0 qt of SYNTHETIC 5W-20 API, per the factory manual.

Does the 1995 Grand Marquis have open recalls?

NHTSA lists 7 recall campaign(s) for this model year. Check your specific vehicle by VIN.

What gas mileage does the Grand Marquis get?

EPA figures are 15 city / 23 highway / 18 combined mpg.