Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2015 SLK55 AMG.
The 2015 Mercedes SLK55 AMG takes 10.0 qt of 0W-30 engine oil.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI Battery group and CCA will vary by model options and region. Refer to the appropriate service information. · Battery group and CCA will vary by model options and region. Refer to the appropriate service information. CCA battery, OE oil filter 0309970748. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 0309970748 alt 2781840280 |
| Engine air filter | 152094000465 |
| Fuel filter | 1724700400 alt 1724700290 |
| Spark plug | 0041598103 |
| Battery | 2115410001 alt 0019828108 |
| Front wiper blades | 1718202500 |
| Thermostat | 2782010280 alt 2782000115 |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 10.0 qt of 0W-30 / 5W-30 / 0W-40 engine oil, DOT 4 brake fluid. Torque the oil drain plug to 22.1 ft-lbs. The firing order is 1-5-4-2-6-3-7-8. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Brake Fluid | DOT 4 |
| Engine Oil | 0W-30 · 5W-30 · 0W-40 · 5W-40 · 5W-50 |
| Engine Oil Capacity | 10.0 qt |
| Fuel Tank Capacity | 18.5 gallons |
| Intake Manifold to Engine Bolts | 6.6 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 8.8 ft-lbs |
| Intake Manifold to Engine Bolts | 6.6 |
| Exhaust Manifold to Cylinder Head Bolts | 8.8 |
| Intake Manifold to Engine Bolts | 6.6 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | M7 nuts: 11.0, M8 nuts: 16.0 ft-lbs |
| Engine Oil Pan Drain Plug | 22.1 ft-lbs |
| Rear Wheel Hub | 258.0 ft-lbs |
| Cylinder Firing Order | 1-5-4-2-6-3-7-8 |
| Cylinder Firing Order | 1-5-4-2-6-3-7-8 |
| Spark Plug Manufacturer | Mercedes - Benz |
| Spark Plug Gap | .031 in |
| Spark Plug Torque | 17 ft-lbs |
| Spark Plug Manufacturer | Mercedes-Benz |
| Spark Plug Gap | 0.031 in |
| Spark Plug Torque | 15.0-20.0 ft-lbs |
| Refrigerant | R134a |
| Refrigerant Capacity | 1.21 lbs |
| Oil Group | PAG |
| Oil Type | 46 |
| Oil Capacity | 4.05 oz |
| Engine Compression | 203 |
| Brake Caliper Bolt to Carrier Torque | Front: 21; Rear: 21 /; Rear: 21 |
| Brake Caliper Carrier to Hub Bolt Torque | Front: 85; Rear: 81 /; Front: 85; Rear: 81 |
| Minimum Pad Thickness | Front: 0.079; Rear: 0.079 Vehicle |
Prep Do not reuse old bolts. Coat new bolts lightly with specified motor oil. · Bolts 1-10
| 1 | 14.8 ft. lbs. | 14.8 ft. lbs |
| 2 | 29.5 ft. lbs. | 29.5 ft. lbs |
| 3 | 90 degrees | 90 degrees |
| 4 | 90 degrees | 90 degrees |
| 5 | 90 degrees | 90 degrees |
| 6 | Bolt 11 10.3 ft. lbs. | 10.3 ft. lbs |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
10.0 qt of All temperatures: 0W-30, 5W-30, 0W-40, 5W-40, 5W-50 Meeting MB specification sheet 229.5 or equivalent., per the factory manual.