Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2013 S550.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI Battery group and CCA will vary by model options and region. Refer to the appropriate service information. · Battery group and CCA will vary by model options and region. Refer to the appropriate service information. CCA battery, OE oil filter 0309970748. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 0309970748 alt 2781840280 |
| Fuel filter | 2214701890 |
| Spark plug | 0041598103 |
| Battery | 000982960864 alt 0019828208 |
| Front wiper blades | 2218201300 |
| Thermostat | 2782001600 |
| Cabin air filter | 2218300718 |
Engine, drivetrain, dimensions and economy.
| Overall length | 205.1 in |
| Overall width | 73.6 in |
| Overall height | 57.9 in |
| Wheelbase | 124.8 in |
| Curb weight | 4619 lb |
| Track (front / rear) | 62.6 / 62.6 in |
| Weight distribution (front / rear) | 52/48 |
Capacities, torques and tune-up values from the factory service manual.
This engine DOT 4 brake fluid. Torque lug nuts to 110 ft-lbs, the oil drain plug to 22.1 ft-lbs. The firing order is 1-5-4-2-6-3-7-8.
| Automatic Transmission Fluid | ATF |
| Automatic Transmission Fluid Capacity | 9.5-13.5 |
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 3.5 Pints |
| Intake Manifold to Engine Bolts | 6.6 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | M7 nuts: 11 ft-lbs, M8 nuts: 16 ft-lbs |
| Engine Oil Pan Drain Plug | 22.1 ft-lbs |
| Lug Nuts | 110 ft-lbs |
| Cylinder Firing Order | 1-5-4-2-6-3-7-8 |
| Cylinder Firing Order | 1-5-4-2-6-3-7-8 |
| Refrigerant | R134a |
| Brake Application | WITH OPTION CODES 494, 498, 625, 951, 950+ |
| Torque Caliper to Bracket | 21 ft-lbs |
| Torque to Knuckle | 133 ft-lbs / 81 ft-lbs |
| Brake Application | WITH OPTION CODES 494, 498, 625, 951, 950+ |
| Rotor Nominal Thickness From | 1.417 in / 1.26 in / 0.945 in |
| Rotor Nominal Thickness To | 1.417 in / 1.26 in / 0.945 in |
| Rotor Minimum Machining | 1.358 in / 1.2 in / 0.866 in |
| Rotor Discard at or Under | 1.339 in / 1.181 in / 0.843 in |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.