Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2020 Maybach S650.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI Auxilliary: 400 AGM VRLA Battery is required. · 12.0 O.E. AmpHrs. CCA battery. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
Engine, drivetrain, dimensions and economy.
| Overall length | 205.1 in |
| Overall width | 79.9 in |
| Overall height | 71.7 in |
| Wheelbase | 123.2 in |
| Curb weight | 5756 lb |
| Track (front / rear) | 66.9 / 67.7 in |
Capacities, torques and tune-up values from the factory service manual.
| Oil Pump to Cylinder BLock Bolts/Studs | 15.0 ft-lbs |
| Standard BCI Cranking Performance | 12.0 O.E. AmpHrs. cca |
| Brake Caliper Bolt to Carrier Torque | Front: NS; Rear: 26.0 ft-lbs |
| Brake Caliper Carrier to Hub Bolt Torque | Front: NS; Rear: 81.0 ft-lbs |
| ABS Sensor Torque | Front: 6.0; Rear: 6.0 |
| Vented Rotor Minimum Thickness for Replacement | Front: 1.315; Rear: .921; Front: 1.300; Rear: .945 |
| 1 | 33.0 ft. lbs., Step 2: 90° | 33 ft. lbs |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.