Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2017 Maybach S550.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 48; AUXILLARY: 400 · 760; AUXILLARY: 200 CCA battery. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
Engine, drivetrain, dimensions and economy.
| Overall length | 214.6 in |
| Overall width | 74.8 in |
| Overall height | 59.1 in |
| Wheelbase | 132.7 in |
| Curb weight | 5148 lb |
| Track (front / rear) | 63.8 / 64.6 in |
Capacities, torques and tune-up values from the factory service manual.
Torque lug nuts to 110 ft-lbs, the oil drain plug to 20.0 ft-lbs.
| Crankshaft Position (CKP) Sensor Bolt(s) | 7.4 ft-lbs |
| Camshaft Position (CMP) Sensor Bolt(s) | 7.4 ft-lbs |
| Intake Manifold to Engine Bolts | 6.6 |
| Oil Pan to Block Bolts | 7.4 ft-lbs |
| Engine Oil Pan Drain Plug | 20.0 ft-lbs |
| Lug Nuts | 110 ft-lbs |
| Standard BCI Group Number | 48; AUXILLARY: 400 |
| Standard BCI Cranking Performance | 760; AUXILLARY: 200 cca |
| Optional BCI Group Number | 48, 49, NA |
| Optional BCI Cranking Performance | 800, 850, 950 cca |
| 1 | 44.0 inch lbs., Step 2: 18.0 ft. lbs., Step 3: 90 | 44 in |
| 1 | 15.0 ft. lbs., Step 2: 33.0 ft. lbs., Step 3: 90 | 15 ft. lbs |
| 1 | 44.0 inch lbs., Step 2: 15.0 | 44 in |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.