2018 Mercedes GLE550

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2018 GLE550.

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

Torque the oil drain plug to 20.0 ft-lbs. The firing order is 1-5-4-2-6-3-7-8.

Engine torques

Crankshaft Position (CKP) Sensor Bolt(s)	7.4 ft-lbs
Camshaft Position (CMP) Sensor Bolt(s)	7.4 ft-lbs
Intake Manifold to Engine Bolts	6.6 ft-lbs
Oil Pan to Block Bolts	7.4 ft-lbs
Engine Oil Pan Drain Plug	20.0 ft-lbs

Ignition

Cylinder Firing Order

1-5-4-2-6-3-7-8

Multi-step torque procedures OEM · verified

Connecting Rod (Large End) Bearings — tightening sequence 1 stages

44.0 inch lbs., Step 2: 18.0 ft. lbs., Step 3: 90

44 in

Engine Flywheel Bolts — tightening sequence 1 stages

15.0 ft. lbs., Step 2: 33.0 ft. lbs., Step 3: 90

15 ft. lbs

Oil Pump to Cylinder BLock Bolts/Studs — tightening sequence 1 stages

44.0 inch lbs., Step 2: 15.0

44 in

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420

Catalyst system efficiency below threshold — Bank 1

P0300

Random / multiple cylinder misfire detected

P0171

System too lean — Bank 1

P0455

Evaporative emission system leak detected — large leak

P0128

Coolant thermostat below regulating temperature

P0442

Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN

Decode a VIN to confirm the transmission and build data for a specific GLE550. OEM

Build data

Plant, GVWR class, engine and body data for any 17-character VIN.

Recalls

Check open recall campaigns against a specific vehicle by VIN.