2017 Mercedes GLE550

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2017 GLE550.

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

Torque the oil drain plug to 20.0 ft-lbs.

Crankshaft Position (CKP) Sensor Bolt(s)	7.4 ft-lbs
Camshaft Position (CMP) Sensor Bolt(s)	7.4 ft-lbs
Intake Manifold to Engine Bolts	6.6
Oil Pan to Block Bolts	7.4 ft-lbs
Engine Oil Pan Drain Plug	20.0 ft-lbs

Connecting Rod (Large End) Bearings — tightening sequence 1 stages

44.0 inch lbs., Step 2: 18.0 ft. lbs., Step 3: 90

44 in

Engine Flywheel Bolts — tightening sequence 1 stages

15.0 ft. lbs., Step 2: 33.0 ft. lbs., Step 3: 90

15 ft. lbs

Oil Pump to Cylinder BLock Bolts/Studs — tightening sequence 1 stages

44.0 inch lbs., Step 2: 15.0

44 in

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

Catalyst system efficiency below threshold — Bank 1

Random / multiple cylinder misfire detected

System too lean — Bank 1

Evaporative emission system leak detected — large leak

Coolant thermostat below regulating temperature

Evaporative emission system leak detected — small leak

Decode factory build data for a specific vehicle by VIN.

VIN

Decode a VIN to confirm the transmission and build data for a specific GLE550. OEM

Build data

Plant, GVWR class, engine and body data for any 17-character VIN.

Recalls

Check open recall campaigns against a specific vehicle by VIN.