Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2016 GLE350d.
The 2016 Mercedes GLE350d is the subject of this reference overview. The provided data does not specify the vehicle's body, platform, or engine. Additionally, there are no available facts to establish standout specifications or the model's reliability history.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI Battery group and CCA will vary by model options and region. Refer to the appropriate service information. · Battery group and CCA will vary by model options and region. Refer to the appropriate service information. CCA battery. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
Capacities, torques and tune-up values from the factory service manual.
This engine 75W-85 · 75W-83 in the differential, DOT 4 brake fluid. Torque the oil drain plug to 22.1 ft-lbs. The firing order is 1-4-2-5-3-6. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Brake Fluid | DOT 4 |
| Differential Gear Oil | 75W-85 · 75W-83 |
| Differential Gear Oil Capacity | 2.0-4.0 |
| Intake Manifold to Engine Bolts | 13.3 ft/lbs. |
| Exhaust Manifold to Cylinder Head Bolts | 18.4 |
| Intake Manifold to Engine Bolts | 12.5 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 18.4 ft-lbs |
| Engine Oil Pan Drain Plug | 22.1 ft-lbs |
| Cylinder Firing Order | 1-4-2-5-3-6 |
| Spark Plug Manufacturer | Mercedes-Benz |
| Spark Plug Gap | 0.031 in |
| Spark Plug Torque | 15.0-20.0 ft-lbs |
| Engine Compression | Diesel psi 333-435 / max variation 43 psi |
| Minimum Pad Thickness | Front: 0.079; Rear: 0.079 Vehicle |
Prep Do not reuse old bolts. Coat new bolts lightly with specified motor oil. The length of new M12 cylinder head bolts are 205mm. if the length of the M12 bolts are greater than the maximum permissible dimension of 207mm, replace with new cylinder head bolts. · Bolts 1-8
| 1 | 7.4 ft. lbs.; Bolt 11 | 7.4 ft. lbs |
| 1 | 14.8 ft. lbs.; Bolts 1-8 | 14.8 ft. lbs |
| 2 | 44.25 ft. lbs.; Bolt 11 | 44.25 ft. lbs |
| 2 | 14.8 ft. lbs.; Bolts 1-8 | 14.8 ft. lbs |
| 3 | 90 degrees; Bolt 11 | 90 degrees |
| 3 | 14.8 ft. lbs.; Bolts 1-8 | 14.8 ft. lbs |
| 4 | 90 degrees; Bolt 11 | 90 degrees |
| 4 | 14.8 ft. lbs.; Bolts 1-8 | 14.8 ft. lbs |
| 5 | 90 degrees; Bolt 11 | 90 degrees |
| 5 | 14.8 ft. lbs. | 14.8 ft. lbs |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
Showing 2 of 2 campaigns on record for this vehicle.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain model year 2016-2017 GL350 4Matic Bluetec, GL550 4Matic, GLE350 4Matic, GLE43 AMG Coupe, GLE450 4Matic, 2016 GLE300d 4Matic, GLE350, GLE350d 4Matic, GLE400 4Matic… Remedy: MBUSA will notify owners, and dealers will update the OCS software, free of charge. Owners may contact MBUSA customer service at 1-800-367-6372.
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2016 GLE300d 4Matic, E400 4Matic Coupe, GL63 AMG, GLE350, GLE350 4Matic, GLE350d 4Matic, GLE400 4Matic, GLE43 AMG Coupe 4Matic, GLE550e 4Matic, GLE63 AMG 4Matic… Remedy: MBUSA will notify owners, and dealers will replace the connector and inspect the electric power steering rack, replacing the rack as necessary. These repairs will be performed…
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
NHTSA lists 2 recall campaign(s) for this model year. Check your specific vehicle by VIN.