Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2021 G63 AMG.
The 2021 Mercedes G63 AMG takes 10.0 qt of 0W-40 engine oil.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses OE oil filter 0309970748. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 0309970748 alt 278180000990 |
| Spark plug | 0001590500 |
| Battery | 0019828208 |
| Front wiper blades | 4638200407 |
| Thermostat | 1772008801 |
| Cabin air filter | 4638301102 |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 10.0 qt of 0W-40 / 5W-40 engine oil, MB Sheet 235.31 in the differential, DOT 4 brake fluid. Torque the oil drain plug to Use a new seal: 15.0 ft-lbs.
| Automatic Transmission Fluid | MB Sheet 236.17 |
| Automatic Transmission Fluid Capacity | 10.5 qt |
| Brake Fluid | DOT 4 |
| Differential Gear Oil | MB Sheet 235.31 |
| Engine Coolant | Coolant listed on either MB 325.6 |
| Engine Coolant Capacity | 14.5 qt |
| Engine Oil | 0W-40 · 5W-40 |
| Engine Oil Capacity | 10.0 qt |
| Cylinder Head Instructions | Use new bolts only. |
| Intake Manifold to Engine Bolts | 9.6 ft-lbs |
| Engine Oil Pan Drain Plug | Use a new seal: 15.0 ft-lbs |
| Differential Fill Plug | Final Drive: 66.0 ft-lbs |
| Differential drain Plug | Front: 66.0 ft-lbs |
| Transfer Case Fill Plug | 10.0 ft-lbs |
| Transfer Case Drain Plug | 10.0 ft-lbs |
| Spark Plug Manufacturer | Mercedes-Benz |
| Spark Plug Gap | 0.028 in |
| Spark Plug Torque | 16.0 ft-lbs |
| Minimum Pad Thickness | 0.079" in |
| 1 | 44.0 inch lbs., Step 2: 22.0 ft. lbs., Step 3: 90°. | 44 in |
| 1 | 148.0 ft. lbs., Step 2: 90° | 148 ft. lbs |
| 1 | Bolts 1-10 | 30 ft. lbs |
| 1 | 15.0 ft. lbs., Step 2: 33.0 ft. lbs., Step 3: 90° | 15 ft. lbs |
| 1 | 10.3 ft. lbs., Step 2: 10.3 ft. lbs., Step 3: 10.3 | 10.3 ft. lbs |
| 1 | 44.0 inch lbs., Step 2: 15.0 | 44 in |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
10.0 qt of 0W-40, 5W-40 meeting MB Sheet 229.50, per the factory manual.