Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2012 E63 AMG Wagon.
The 2012 Mercedes E63 AMG Wagon takes 9.3 qt of 0W-30 engine oil.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 48 · 760 CCA battery, OE oil filter 0309970748. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 0309970748 alt 2781840280 |
| Spark plug | 0041598103 |
| Battery | 000982960864 alt 0019828108 |
| Front wiper blades | 2128201900 |
| Thermostat | 2782010280 alt 2782001600 |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 9.3 qt of 0W-30 / 5W-30 / 0W-40 engine oil, DOT 4 brake fluid. Torque lug nuts to 96 ft-lbs, the oil drain plug to 22.1 ft-lbs. The firing order is 1-5-4-2-6-3-7-8.
| Automatic Transmission Fluid | ATF |
| Automatic Transmission Fluid Capacity | 9.5-13.5 |
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 2.5 Pints |
| Engine Coolant | USE ONLY COOLANT MEETING MB SHEET 325.0 |
| Engine Oil | 0W-30 · 5W-30 · 0W-40 · 5W-40 · 5W-50 |
| Engine Oil Capacity | 9.3 qt |
| Intake Manifold to Engine Bolts | 6.6 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | M7 nuts: 11 ft-lbs, M8 nuts: 16 ft-lbs |
| Intake Manifold to Engine Bolts | 6.6 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 12.0 ft-lbs |
| Engine Oil Pan Drain Plug | 22.1 ft-lbs |
| Lug Nuts | 96 ft-lbs |
| Cylinder Firing Order | 1-5-4-2-6-3-7-8 |
| Refrigerant | R134a |
| Refrigerant Capacity | Except AMG, 2.30; AMG, 1.41. lbs |
| Oil Group | PAG |
| Oil Type | 46 |
| Oil Capacity | 4.06 oz |
| Standard BCI Group Number | 48 |
| Standard BCI Cranking Performance | 760 cca |
| Pressure Test | 20.3 psi |
| Thermostat Opening Temperature | 185-192 °F |
| Engine Compression | 174 |
| Engine Compression | 174-232 psi |
| Torque to Knuckle | 81 ft-lbs / 133 ft-lbs |
| Rotor Nominal Thickness From | 1.259 in / 1.535 in / 1.023 in / 1.417 in |
| Rotor Nominal Thickness To | 1.259 in / 1.535 in / 1.023 in / 1.417 in |
| Rotor Minimum Machining | 0.964 in / 1.318 in |
| Rotor Discard at or Under | 0.944 in / 1.299 in |
| 1 | 148 ft. lbs., step 2: 180 | 148 ft. lbs |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
9.3 qt of 0W-30, 5W-30, 0W-40, 5W-40 OR 5W-50, per the factory manual.