Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2005 E320 Wagon 4matic.
The 2005 Mercedes E320 Wagon 4matic takes 7.7 qt of 0W-30 engine oil.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 49 · 825 CCA battery, OE oil filter 0259976548. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 0259976548 alt 0259976648 |
| Engine air filter | 6460940104 |
| Fuel filter | 6420920501 |
| Battery | 0019828208 alt 0019828008 |
| Front wiper blades | 2118202945 |
| Thermostat | 1122030076 alt 6112030380 |
| Cabin air filter | 2118301218 alt 2118301200 |
Engine, drivetrain, dimensions and economy.
| Overall length | 190.2 in |
| Overall width | 71.3 in |
| Overall height | 57.1 in |
| Wheelbase | 112.2 in |
| Curb weight | 3638 lb |
| Track (front / rear) | 61.8 / 61 in |
| Weight distribution (front / rear) | 50/50 |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 7.7 qt of 0W-30 / 5W-30 / 0W-40 engine oil, DOT 4 brake fluid. Torque lug nuts to 96 ft-lbs, the oil drain plug to 22.1 ft-lbs. The firing order is 1-4-3-6-2-5.
| Automatic Transmission Fluid | ATF |
| Automatic Transmission Fluid Capacity | 7.5-9.5 |
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 1.3 Pints |
| Differential Gear Oil Capacity | 2.1 Pints |
| Differential Gear Oil Capacity | 2.7 Pints |
| Engine Coolant | USE ONLY COOLANT MEETING MB SHEET 325.0 |
| Engine Oil | 0W-30 · 5W-30 · 0W-40 · 5W-40 · 5W-50 |
| Intake Manifold to Engine Bolts | 15 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 12 ft-lbs |
| Intake Manifold to Engine Bolts | 15 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 12 ft-lbs |
| Engine Oil Pan Drain Plug | 22.1 ft-lbs |
| Engine Oil Pan Drain Plug | 22.1 ft-lbs |
| Lug Nuts | 96 ft-lbs |
| Cylinder Firing Order | 1-5-3-6-2-4 |
| Cylinder Firing Order | 1-5-3-6-2-4 |
| Cylinder Firing Order | 1-4-3-6-2-5 |
| Spark Plug Gap | 0.031 in |
| Refrigerant | R134a |
| Refrigerant Capacity | 2.20 lbs |
| Oil Group | PAG |
| Oil Type | MB part number 0019890803 or equivalent |
| Oil Capacity | 5.20 oz |
| Standard BCI Group Number | 49 |
| Standard BCI Cranking Performance | 825 cca |
| Standard BCI Group Number | 49 |
| Regulated Fuel System Pressure (Without Vacuum) | 54.0-61.0 psi |
| Regulated Fuel System Pressure (With Vacuum) | 46.0-52.0 psi |
| Engine Compression | 420-507 psi |
| Torque to Knuckle | 85 ft-lbs |
| Torque to Knuckle | 85 ft-lbs |
| Torque Caliper to Bracket | 38 ft-lbs |
| Torque to Knuckle | 85 ft-lbs |
| Minimum Pad Thickness | Front: 0.079; Rear: 0.079 in |
| Rotor Nominal Thickness From | 1.102 in |
| Rotor Nominal Thickness To | 1.102 in |
| Rotor Minimum Machining | 1.024 in |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
7.7 qt of 0W-30, 5W-30, 0W-40, 5W-40 OR 5W-50, per the factory manual.