Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2019 CLA45 AMG.
The 2019 Mercedes CLA45 AMG takes 5.8 qt of 0W-40 engine oil.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 48 Battery must be carefully sized to fit as the manufacturer of the battery used many size batteries. The O.E Battery is a Valve Regulated Lead Battery and is vented outside of the vehicle. This vehicle requires a AGM VRLA battery to be used. · 70 O.E. AmpHrs CCA battery, OE oil filter 2701840280. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 2701840280 alt 278180000990 |
| Battery | 0019828108 |
| Front wiper blades | 1768204300 |
| Thermostat | 024997634564 alt 2702002200 |
Engine, drivetrain, dimensions and economy.
| Overall length | 184.6 in |
| Overall width | 70.1 in |
| Overall height | 55.9 in |
| Wheelbase | 106.3 in |
| Curb weight | 3494 lb |
| Track (front / rear) | 61 / 60.6 in |
| Weight distribution (front / rear) | 61/39 |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 5.8 qt of 0W-40 / 5W-40 engine oil, Dot 4 brake fluid. Torque lug nuts to 96 ft-lbs. The firing order is 1-3-4-2.
| Brake Fluid | Dot 4 |
| Engine Oil | SAE 0W · SAE 5W |
| Engine Oil Capacity | 5.8 qt |
| Oil Pump to Cylinder BLock Bolts/Studs | 120 inch lbs. ft-lbs |
| Lug Nuts | 96 ft-lbs |
| Cylinder Firing Order | 1-3-4-2 |
| Cylinder Firing Order | 1-3-4-2 |
| Standard BCI Group Number | 48 |
| Standard BCI Cranking Performance | 70 O.E. AmpHrs cca |
| Optional BCI Group Number | 48 |
| Optional BCI Cranking Performance | 80 |
| ABS Sensor Torque | Front: 6.0; Rear: 6.0 |
| 1 | 89 inch lbs., Step 2: 90°. | 89 in |
| 1 | 44 inch lbs., Step 2: 264 inch lbs., Step 3: 90°. | 44 in |
| 1 | M11 Bolts | 14.8 ft. lbs |
| 1 | 33 ft. lbs., Step 2: 90°. | 33 ft. lbs |
| 1 | 28 ft. lbs., Step 2: 90°. | 28 ft. lbs |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
5.8 qt of SAE 0W-40 or SAE 5W-40 only., per the factory manual.