Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2017 CLA250.
The 2017 Mercedes CLA250 overview frames the vehicle within its specific model year, though the provided data entirely omits the facts necessary to describe its body, platform, or engine. Without any standout specifications available in the source material, it is impossible to naturally integrate the vehicle's mechanical or performance footprint into this reference. Consequently, determining where this model year sits in the model's reliability history—and what that implies for researchers evaluating its long-term viability—cannot be established from the given facts alone.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 48 · 760 CCA battery, OE oil filter 0009972405. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 0009972405 alt 000997250564 |
| Engine air filter | 2700940004 |
| Battery | 0019828108 alt 0019828008 |
| Front wiper blades | 1768204300 |
| Thermostat | 024997634564 alt 2702002200 |
Engine, drivetrain, dimensions and economy.
| Overall length | 182.3 in |
| Overall width | 70.1 in |
| Overall height | 56.7 in |
| Wheelbase | 106.3 in |
| Curb weight | 3263 lb |
| Track (front / rear) | 61 / 60.6 in |
| Weight distribution (front / rear) | 61/39 |
Capacities, torques and tune-up values from the factory service manual.
Torque lug nuts to 96 ft-lbs, the oil drain plug to 20.0 ft-lbs. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Crankshaft Position (CKP) Sensor Bolt(s) | 7.4 ft-lbs |
| Camshaft Position (CMP) Sensor Bolt(s) | 7.4 ft-lbs |
| Oxygen (O2S) Sensor Bolt(s) | 30.0 ft-lbs |
| Knock Sense (KS) Bolt(s) | 16.0 ft-lbs |
| Intake Manifold to Engine Bolts | 10.3 |
| Exhaust Manifold to Cylinder Head Bolts | 15 FT/LBS. |
| Oil Pan to Block Bolts | 7.2-8.7 ft-lbs |
| Engine Oil Pan Drain Plug | 20.0 ft-lbs |
| Lug Nuts | 96 ft-lbs |
| Standard BCI Group Number | 48 |
| Standard BCI Cranking Performance | 760 cca |
| Optional BCI Group Number | 48; AUXILLARY: 400 |
| Optional BCI Cranking Performance | 800; AUXILLARY: 200 cca |
| 1 | 89.0 inch lbs., Step 2: 90 | 89 in |
| 1 | 44.0 inch lbs., Step 2: 132.0 inch lbs., Step 3: 90 | 44 in |
| 1 | 148.0 ft. lbs. | 148 ft. lbs |
| 2 | + 180 | |
Prep Do not reuse old bolts. Use new bolts coated with clean engine oil. Tighten all bolts to finger tight then continue on with the following procedure.
| 1 | Bolts 1-10 | 14.7 ft. lbs |
| 2 | 29.5 ft. lbs. | 29.5 ft. lbs |
| 3 | 90 degrees | 90 degrees |
| 4 | 90 degrees | 90 degrees |
| 5 | 90 degrees | 90 degrees |
| 6 | 14.8 | |
Prep Do not reuse old bolts. Use new bolts coated with clean engine oil. Tighten all bolts to finger tight then continue on with the following procedure.
| 1 | Bolts 1-10 | 14.7 ft. lbs |
| 2 | 29.5 ft. lbs. | 29.5 ft. lbs |
| 3 | 90 degrees | 90 degrees |
| 4 | 90 degrees | 90 degrees |
| 5 | 90 degrees | 90 degrees |
| 6 | 14.8 | |
| 1 | 33.0 ft. lbs., Step 2: 90 | 33 ft. lbs |
| 1 | 27.0 ft. lbs., Step 2: 120 | 27 ft. lbs |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
Showing 2 of 10 campaigns on record for this vehicle.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2017 B250e, CLA250, 2017-2018 AMG CLA45, GLA250, and AMG GLA45 vehicles. The steering shaft bore hole for the universal joint bearing may allow excessive movement… Remedy: MBUSA will notify owners, and dealers will inspect, and as necessary, replace the steering shaft, free of charge. Owner notification letters were mailed July 23, 2021. Owners may…
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2015-2018 CLA250 and CLA250 4MATIC, and 2017-2018 CLA45 AMG vehicles. The Occupant Classification System (OCS) may have been improperly calibrated, which may prevent… Remedy: MBUSA will notify owners, and dealers will replace the passenger seat cushion, free of charge. The recall began July 31, 2020. Owners may contact MBUSA customer service at…
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
NHTSA lists 10 recall campaign(s) for this model year. Check your specific vehicle by VIN.