Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2014 C63 AMG.
The 2014 Mercedes C63 AMG takes 9.0 qt of 0W-30 engine oil.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 49 · 850 CCA battery, OE oil filter 1561840361. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 1561840361 alt 0001803009 |
| Engine air filter | 1560940504 |
| Spark plug | 0041593903 |
| Battery | 0019828208 |
| Front wiper blades | 2128201700 |
| Thermostat | 1562030380 alt 1562030475 |
Engine, drivetrain, dimensions and economy.
| Overall length | 185.8 in |
| Overall width | 69.7 in |
| Overall height | 56.7 in |
| Wheelbase | 108.7 in |
| Curb weight | 3814 lb |
| Track (front / rear) | 59.8 / 59.1 in |
| Weight distribution (front / rear) | 53/47 |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 9.0 qt of 0W-30 / 5W-30 / 0W-40 engine oil, DOT 4 brake fluid. Torque lug nuts to 96 ft-lbs, the oil drain plug to 22.1 ft-lbs. The firing order is 1-5-4-2-6-3-7-8.
| Automatic Transmission Fluid | ATF |
| Automatic Transmission Fluid Capacity | 9.5-13.5 |
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 2.5 Pints |
| Engine Oil | 0W-30 · 5W-30 · 0W-40 · 5W-40 · 5W-50 |
| Engine Oil Capacity | 9.0 qt |
| Exhaust Manifold to Cylinder Head Bolts | 16 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 16.0 ft-lbs |
| Engine Oil Pan Drain Plug | 22.1 ft-lbs |
| Lug Nuts | 96 ft-lbs |
| Cylinder Firing Order | 1-5-4-2-6-3-7-8 |
| Cylinder Firing Order | 1-5-4-2-6-3-7-8 |
| Refrigerant | R134a |
| Refrigerant Capacity | 1.30-1.40 lbs |
| Oil Group | PAG |
| Oil Type | 46 |
| Oil Capacity | 4.06 oz |
| Standard BCI Group Number | 49 |
| Standard BCI Cranking Performance | 850 cca |
| Engine Compression | 174-232 psi |
| Torque to Knuckle | 132 ft-lbs / 81 ft-lbs |
| Rotor Nominal Thickness From | 1.417 in / 1.023 in |
| Rotor Nominal Thickness To | 1.417 in / 1.023 in |
| Rotor Minimum Machining | 1.318 in / 1.338 in / 0.964 in |
| Rotor Discard at or Under | 1.299 in / 1.314 in / 0.944 in |
| 1 | 184 ft. lbs., step 2: 360 degrees, step 3: 147 ft. lbs., step 4: 180 | 184 ft. lbs |
| 1 | 7.4 ft. lbs., step 2: turn 90 degrees, step 3: turn 10 | 7.4 ft. lbs |
| 1 | 7.4, Step 2 | 90 degrees |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
9.0 qt of 0W-30, 5W-30, 0W-40, 5W-40 OR 5W-50, per the factory manual.