Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2020 Forte5.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 121R · 550 CCA battery. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
Engine, drivetrain, dimensions and economy.
| Overall length | 178 in |
| Overall width | 70.9 in |
| Overall height | 56.7 in |
| Wheelbase | 106.3 in |
| Curb weight | 2864 lb |
| Track (front / rear) | 60.2 / 60.2 in |
| Weight distribution (front / rear) | 61/39 |
Capacities, torques and tune-up values from the factory service manual.
| Crankshaft Pulley and/or Damper Bolts | 109.0-116.0 ft-lbs |
| Engine Flywheel Bolts | 53.0-56.0 ft-lbs |
| Standard BCI Group Number | 121R |
| Standard BCI Cranking Performance | 550 cca |
| Regulated Fuel System Pressure (With Vacuum) | 70.0-75.0 psi |
| 1 | M6 Bolts | 9–10 ft. lbs |
| 1 | 13.0-16.0 ft. lbs., Step 2: 90° | 13–16 ft. lbs |
| 1 | 34.0-38.0 ft. lbs., Step 2: 38-42° | 34–38 ft. lbs |
| 1 | 24-27.0 ft. lbs., Step 2: 90-95°, Step 3: 90-95° | 24–27 ft. lbs |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.