Jaguar›Super V8›2008›V8/jaguar/super-v8/2008/v8/

2008 Jaguar Super V8 — V8

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2008 Super V8 V8.

Engine V8Transmission Automatic 6-spd

The 2008 Jaguar Super V8 V8 is EPA-rated at 15/22/18 mpg city/highway/combined.

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Lug nut torque75 ft-lbsOEM · verified

EPA fuel economy15/22/18 mpgEPA · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses a BCI 93 · 800 CCA battery, OE oil filter C2C41611. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Battery groupBCI 93 · 800 CCAOEM · verified

OE service part numbers OEM · verified

Engine oil filter	C2C41611 alt NCE1842AA
Engine air filter	AJ82766
Fuel filter	C2C35417
Spark plug	C2A1535
Battery	C2D61169
Front wiper blades	XR858033 alt XR858025
Serpentine belt	C2C37055 alt C2C26235
Thermostat	AJ83525 alt AJ811788
Cabin air filter	C2C6884

Full specifications

Engine, drivetrain, dimensions and economy.

Engine & drivetrain NHTSA vPIC

Transmission

Automatic 6-spd

Dimensions & weight NHTSA vPIC

Overall length	206.3 in
Overall width	71.7 in
Overall height	57.5 in
Wheelbase	124 in
Curb weight	4001 lb
Track (front / rear)	61.4 / 61 in
Weight distribution (front / rear)	52/48

Ratings & economy EPA / vPIC

EPA city / highway / combined	15 / 22 / 18 mpg
Drivetrain	Rear-Wheel Drive
Passenger volume	107 cu ft
Cargo volume	15 cu ft
Recommended fuel	Premium Gasoline

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine SYNTHETIC · 75W-140 · GL-5 in the differential. Torque lug nuts to 75 ft-lbs. The firing order is 1-2-7-3-4-5-6-8.

Lubricants & capacities

Differential Gear Oil	SYNTHETIC · 75W-140 · GL-5
Differential Gear Oil Capacity	2.7 Pints
Power Steering Fluid	ATF

Engine torques

Oil Pump to Cylinder BLock Bolts/Studs

9-10 ft-lbs

Chassis torques

Lug Nuts

75 ft-lbs

Ignition

Cylinder Firing Order

1-2-7-3-4-5-6-8

Battery & A/C

Refrigerant	R134a
Refrigerant Capacity	2 Zone Units
Oil Group	PAG
Oil Type	46
Oil Capacity	3.72 oz
Standard BCI Group Number	93
Standard BCI Cranking Performance	800 cca

Brakes

Torque Caliper to Bracket	43 ft-lbs / 21 ft-lbs
Torque to Knuckle	85 ft-lbs / 76 ft-lbs
Minimum Pad Thickness	0.078 in
Rotor Runout Limit	0.004 in / 0.003 in
Rotor Nominal Thickness From	1.417 in / 1.023 in
Rotor Nominal Thickness To	1.417 in / 1.023 in
Rotor Discard at or Under	1.338 in / 0.944 in

Multi-step torque procedures OEM · verified

Connecting Rod (Large End) Bearings — tightening sequence 1 stages

8 ft. lbs., Step 2: 22 ft. lbs., Step 3: 90

8 ft. lbs

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the spark plugs every 100,000 mi.

Every 10,000 mi	Accessory Drive Belt (inspect) · Active Suspension System (inspect) · Battery (inspect electrolyte level) · Brake Hydraulic System (inspect fluid level) · Brake Linings (inspect) · Brake Rotor (inspect)
Every 20,000 mi	Cabin Air Filter (replace) · Windshield (clean)
Every 40,000 mi	Engine Air Filter Element (replace)
Every 60,000 mi	Fuel Filter (replace)
Every 100,000 mi	Spark Plugs (replace)
At 150,000 mi	Drive Belt (replace)