HondaPrelude1990Overview/honda/prelude/1990/base/

1990 Honda Prelude

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 1990 Prelude.

Body PASSENGER CAR

The 1990 Honda Prelude is classified as a passenger car carrying a 3.6-quart engine oil capacity and a recommended 10W-30 or 5W-30 API viscosity. Reliability records for this model year document only four total owner complaints, with seat belts identified as the top issue, alongside a single recall. Across the 1990–2006 model run, this year registers the lowest complaint count in the lineup—four versus the 74 tallied for 1997—establishing it as the least troubled entry in the Prelude’s recorded reliability history.

Model year200120001999199819971996199519941990

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity3.6 qtOEM · verified
Engine oil type10W-30 / 5W-30 APIOEM · verified

Full specifications

Engine, drivetrain, dimensions and economy.

Dimensions & weight NHTSA vPIC

Overall length177.6 in
Overall width67.3 in
Overall height51.2 in
Wheelbase101.2 in
Curb weight2639 lb

Performance & power Independent road tests

0–60 mph, quarter-mile, horsepower and torque from independent road tests.

Independent road tests for the Prelude of this era, listed by trim and engine — this page spans more than one engine, so no single horsepower figure is shown.

6.3–10.7 sec0–60 mph (tested)quickest 6.30 sec — 1993 Si VTEC Coupe
YearTrim / engine0–60¼ mileHPDrivetrain
1989Si Coupe 2.0L I-48.60 sec16.50 sec135 hpFWD
1988Si 4WS Coupe 2.0L I-49.00 sec17.00 sec135 hpFWD
1988Si 4WS Coupe 2.0L I-49.30 sec16.80 sec135 hpFWD
1992Si Coupe 2.3L I-47.20 sec15.60 sec160 hpFWD
1993Si VTEC Coupe 2.2L I-46.30 sec14.60 sec190 hpFWD
1993Si VTEC Coupe 2.2L I-46.70 sec15.20 sec190 hpFWD
1985Coupe 1.8L I-410.70 sec16.80 sec100 hpFWD
1995VTEC Coupe 2.2L I-46.70 sec15.10 sec190 hpFWD

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine holds 3.6 qt of 10W-30 / 5W-30 API engine oil, DOT 3 brake fluid.

Lubricants & capacities

Brake FluidDOT 3
Engine CoolantETHYLENE GLYCOL
Engine Oil10W-30 · API · 5W-30
Engine Oil Capacity3.6 qt
Engine Oil10W-30 · API · 5W-30
Engine Oil Capacity3.6 qt

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the engine oil and filter every 7,500 mi; coolant every 30,000 mi. The big-interval services (every 30,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.

Every 7,500 miBrake Linings (inspect) · Engine Oil (drain & refill) · Engine Oil Filter (replace)
At 15,000 miParking Brake System (inspect) · Steering System (inspect)
Every 15,000 miBrake System (inspect) · Engine Valves (inspect valve lash) · Exhaust System (Complete) (inspect) · Power Steering System (inspect) · Steering System (inspect) · Suspension System (inspect alignment)
Every 30,000 miAccessory Drive Belt (inspect) · Antilock Brake System (inspect) · Brake Drum Assembly (inspect) · Brake Hydraulic System (drain, refill & bleed) · Engine Air Filter Element (replace) · Engine Coolant System (drain, flush & refill)
At 45,000 miEngine Coolant System (drain, flush & refill)
Every 60,000 miBrake Line (replace) · Choke System (inspect) · Distributor Cap (inspect) · Distributor Rotor (inspect) · EGR System (inspect) · Exhaust System Heat Shield (inspect)
Every 90,000 miTiming Belt (replace) · Water Pump (inspect)

Reliability & federal safety record

Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.

Owner complaints about the 1990 Honda Prelude dominate in one area — the seat belts, 2 of 4 reports (50%), well ahead of the next concern. That matters, because the seat belts are also the target of recall 95V-103 on this vehicle — so the single most useful check before buying or servicing one is confirming it was actually performed. 0 of the reports describe a crash and 0 a fire — a small share of the total, but worth weighing against the seat belts pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.

1
Open recalls
NHTSA campaigns
2
Service bulletins
Manufacturer communications
0
ODI investigations
Office of Defects Investigation
4
Owner complaints
0 involved a crash · 0 a fire
Owner complaints by model year NHTSA · this generation & adjacent

Owner complaints filed with NHTSA, by component

All 4 complaints on record, top 3 components.

Seat Belts2
Engine & Engine Cooling1
Equipment1

Source: NHTSA Office of Defects Investigation complaint database.

Recalls NHTSA · verified

Showing 1 of 1 campaigns on record for this vehicle.

95V103001Seat Belts:Front:Buckle AssemblyReported 24/05/1995

THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY. Remedy: OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES. CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. CHECK THAT BOTH…

Technical service bulletins NHTSA · verified

Showing 2 of 2 bulletins on record with NHTSA.

BulletinDateComponentSummary
0109012001-09-01Fuel System, GasolineINFORMATION REGARDING CAM-ON FUEL FILL CAP FAILURES DURING SMOG CHECK. *YH
0102002000-02-01Engine And Engine CoolingINFORMATION ON HONING FIBER REINFORCED METAL (FRM) CYLINDERS. *TT

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420
Catalyst system efficiency below threshold — Bank 1
P0300
Random / multiple cylinder misfire detected
P0171
System too lean — Bank 1
P0455
Evaporative emission system leak detected — large leak
P0128
Coolant thermostat below regulating temperature
P0442
Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN
Decode a VIN to confirm the transmission and build data for a specific Prelude. OEM
Build data
Plant, GVWR class, engine and body data for any 17-character VIN.
Recalls
Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Reference guides

Cross-vehicle references for the kinds of data on this page.

Frequently asked

How much oil does the 1990 Prelude take?

3.6 qt of ABOVE -4 degrees F: 10W-30 API, BELOW 32 degrees F: 5W-30 API, per the factory manual.

Does the 1990 Prelude have open recalls?

NHTSA lists 1 recall campaign(s) for this model year. Check your specific vehicle by VIN.