Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the engine oil and filter every 7,500 mi; spark plugs every 30,000 mi; coolant every 30,000 mi. The big-interval services (every 30,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.
| Every 7,500 mi | Clutch Pedal Assembly (inspect) · Engine Oil (drain & refill) · Power Steering System (inspect) · Tire & Wheel Assembly (rotate) |
| Every 15,000 mi | Axle Shaft Oil Seal (inspect) · Brake System (inspect) · CV Joint Boot (inspect) · Engine Coolant System (leak inspection) · Engine Oil Filter (replace) · Exhaust System (Complete) (inspect) |
| Every 30,000 mi | Accessory Drive Belt (inspect) · Antilock Brake System (inspect) · Cabin Air Filter (replace) · Engine Air Filter Element (replace) · Engine Coolant System (drain, flush & refill) · Spark Plugs (replace) |
| At 45,000 mi | Engine Coolant System (drain, flush & refill) |
| Every 45,000 mi | Brake Hydraulic System (drain, refill & bleed) |
| Every 60,000 mi | Spark Plug Wires (inspect) · Timing Belt (replace) · Water Pump (inspect) |
| Every 90,000 mi | Transmission Assembly (drain & refill) |
| At 105,000 mi | Balance Shaft Drive Belt (replace) · Engine Valves (inspect valve lash) · Universal Vehicle Operation (inspect idle speed) |