GMC TruckYukon2022Overview/gmc-truck/yukon/2022/base/

2022 GMC Truck Yukon

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2022 Yukon.

The 2022 GMC Yukon carries a 7.0-quart 0W-20 oil specification, the key lubrication standard for this model year. Reliability data records 164 owner complaints, with the engine cited as the top complaint area alongside five recalls. Within the nameplate’s 1992–2026 history, that complaint total sits far below the 2007 peak of 776 yet remains above the 1993 low of 17, positioning 2022 as a moderate year for researchers mapping the Yukon’s long-term reliability trajectory.

Model year2026202220212019

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity7.0 qtOEM · verified
Engine oil type0W-20OEM · verified
Lug nut torque140.0 ft-lbsOEM · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses a BCI 94R - AGM VRLA battery is required for this vehicle and is vented to the outside of the vehicle. · 730 CCA battery, OE oil filter 12731742. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Battery groupBCI 94R - AGM VRLA battery is required for this vehicle and is vented to the outside of the vehicle. · 730 CCAOEM · verified
Tire size275/60R20 115SOEM · verified
Wheel / rim9 inOEM · verified

OE service part numbers OEM · verified

Engine oil filter12731742 alt 12727115
Engine air filter84121217 alt 84121219
Fuel filter13539108
Spark plug12622441
Battery88866098 alt 88864542
Front wiper blades84278338
Serpentine belt12658178 alt 55490583
Thermostat19420815 alt 12587397
Cabin air filter13540923

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine holds 7.0 qt of 0W-20 engine oil, DOT 4 brake fluid. Torque lug nuts to 140.0 ft-lbs. The firing order is 1-8-7-2-6-5-4-3.

Lubricants & capacities

Automatic Transmission FluidATF
Automatic Transmission Fluid Capacity8.1 qt
Brake FluidDOT 4
Brake Fluid Capacity2.11 pints
Engine Coolant Capacity15.7 qt
Engine Coolant Capacity15.6 qt
Engine Coolant Capacity15.1 qt
Engine Oil0W-20

Engine torques

Cylinder Head InstructionsUse new bolts only.
Cylinder Head InstructionsUse new bolts only.
Intake Manifold to Engine Bolts8.8 ft-lbs
Exhaust Manifold to Cylinder Head Bolts22.0 ft-lbs
Intake Manifold to Engine Bolts7.4 ft-lbs
Oil Pump to Cylinder BLock Bolts/Studs21.0 ft-lbs

Chassis torques

Lug Nuts140.0 ft-lbs

Ignition

Cylinder Firing Order1-5-3-6-2-4
Cylinder Firing Order1-8-7-2-6-5-4-3
Cylinder Firing Order1-8-7-2-6-5-4-3
Spark Plug ManufacturerAC Delco
Spark Plug Gap0.037-0.043" in
Spark Plug Torque15.0 ft-lbs

Battery & A/C

RefrigerantR1234yf
Refrigerant Capacity2.0 lbs
Oil GroupPAG
Standard BCI Cranking Performance730 cca

Brakes

Brake Caliper Bolt to Carrier TorqueFront: NS, Rear: 30.0
ABS Sensor Torque6.5
Minimum Pad Thickness0.078" in
Solid Rotor Minimum Thickness for ReplacementRear: 0.709
Solid Rotor Minimum Thickness after RefinishRear: 0.728
Variation from Parallelism Thickness Variation.001"
Maximum Rotor Runout.002"

Multi-step torque procedures OEM · verified

Connecting Rod (Large End) Bearings — tightening sequence 1 stages
126.0 ft. lbs., Step 2: 45°, Step 3: 15°26 ft. lbs
Crankshaft Pulley and/or Damper Bolts — tightening sequence 1 stages
159.0 ft. lbs., Step 2: 125°59 ft. lbs
Cylinder Head — tightening sequence 1 stages
159.0 ft. lbs., Step 2: All Internal Hex Style Bolts: 130°, Step 3: All Except Internal Hex Style Bolts: 150°59 ft. lbs
Cylinder Head — tightening sequence 1 stages
159.0 ft. lbs., Step 2: All Inside Hex Style Bolts: 130°, Step 3: All Except Inside Hex Style Bolts: 150°59 ft. lbs
Engine Flywheel Bolts — tightening sequence 1 stages
165.0 ft. lbs., Step 2: 30°, Step 3: 15°65 ft. lbs
Main Bearings — tightening sequence 1 stages
137.0 ft. lbs., Step 2: 60°, Step 3: 15°37 ft. lbs

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the spark plugs every 97,500 mi; coolant at 150,000 mi. The big-interval services (at 150,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.

Every 7,500 miAccelerator Pedal (inspect) · Body Latches, Locks & Hinges (lubricate) · Brake Shift Interlock Solenoid (inspect) · Brake System (inspect) · CV Joint Boot (inspect) · Engine Air Filter Element (inspect)
Every 15,000 miWindshield Wiper Blade (replace)
Every 22,500 miCabin Air Filter (replace)
Every 30,000 miFuel Filter (replace)
Every 75,000 miHood Hinge (inspect)
Every 97,500 miSpark Plug Wires (inspect) · Spark Plugs (replace)
At 150,000 miAccessory Drive Belt (inspect) · Engine Coolant System (drain, flush & refill) · Timing Belt (replace)

Reliability & federal safety record

Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.

Owner complaints about the 2022 GMC Truck Yukon dominate in one area — the engine, 58 of 164 reports (35%), well ahead of the next concern. None of this vehicle's 5 recall campaigns target the engine, so those reports read as owner-reported wear-and-tear rather than an acknowledged defect. 1 of the reports describe a crash and 0 a fire — a small share of the total, but worth weighing against the engine pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.

5
Open recalls
NHTSA campaigns
1154
Service bulletins
Manufacturer communications
3
ODI investigations
Office of Defects Investigation
164
Owner complaints
1 involved a crash · 0 a fire
NHTSA crash-test rating federal NCAP · out of 5 stars
Overall★★★★
Frontal★★★★
Side★★★★★
Rollover★★★★★

Owner complaints filed with NHTSA, by component

All 164 complaints on record, top 8 components.

Engine58
Power Train11
Electrical System10
Engine & Engine Cooling9
Power Train,Engine8
Electrical System,Engine7
Unknown Or Other7
Visibility/Wiper4

Source: NHTSA Office of Defects Investigation complaint database.

Recalls NHTSA · verified

Showing 2 of 5 campaigns on record for this vehicle.

22V617000Seat Belts:Critical FastenersReported 11/08/2022

General Motors, LLC (M) is recalling certain 2021-2022 Cadillac Escalade, Escalade ESV, Chevrolet Suburban, Tahoe, GMC Yukon, and Yukon XL vehicles equipped with third-row seats. The rivet that retains the buckle to the… Remedy: Dealers will inspect the rivet head formation on both the left and right side third-row seat belt buckle assemblies and replace seat belt buckle assemblies, as necessary, free of…

22V903000Exterior Lighting:Lighting Control Module:SoftwareReported 08/12/2022

General Motors, LLC (GM) is recalling certain 2020-2023 Cadillac CT4 and CT5; 2021-2023 Buick Envision; and 2022-2023 Cadillac Escalade and Escalade ESV, Chevrolet Silverado 1500, Suburban, Tahoe, GMC Sierra 1500… Remedy: The body control module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed January 23, 2023…

Technical service bulletins NHTSA · verified

Showing 5 of 1154 bulletins on record with NHTSA.

BulletinDateComponentSummary
PIT5910C2026-06-29Unknown Or OtherThis Preliminary information communicates an issue with the dome light off switch not…
PIT6476C2026-06-29Unknown Or OtherThis preliminary information communicates an issue with a Service Brake system message…
PIT5966F2026-06-23Unknown Or OtherThis Preliminary information communicates an issue with an OTA pending message still…
PIT65222026-06-10Unknown Or OtherThis PI advises dealers that if the K160 Brake System Control Module sets DTC P0606 along…
PIT6132E2026-06-09Unknown Or OtherThis Preliminary information communicates an issues with the HVAC making a hum buzz noise…

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420
Catalyst system efficiency below threshold — Bank 1
P0300
Random / multiple cylinder misfire detected
P0171
System too lean — Bank 1
P0455
Evaporative emission system leak detected — large leak
P0128
Coolant thermostat below regulating temperature
P0442
Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN
Decode a VIN to confirm the transmission and build data for a specific Yukon. OEM
Build data
Plant, GVWR class, engine and body data for any 17-character VIN.
Recalls
Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Reference guides

Cross-vehicle references for the kinds of data on this page.

Frequently asked

How much oil does the 2022 Yukon take?

7.0 qt of DexosD Diesel 0W-20, per the factory manual.

Does the 2022 Yukon have open recalls?

NHTSA lists 5 recall campaign(s) for this model year. Check your specific vehicle by VIN.