Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the engine oil and filter every 7,500 mi; spark plugs every 60,000 mi; coolant every 30,000 mi. The big-interval services (every 30,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.
| Every 7,500 mi | Body Latches, Locks & Hinges (inspect) · Brake System (inspect) · Clutch Master Cylinder (inspect fluid level) · Engine Oil (drain & refill) · Engine Oil Filter (replace) · Exhaust System (Complete) (inspect) |
| Every 15,000 mi | CV Joint Boot (inspect) · Driveshaft (inspect) · Driveshaft U-Joint (inspect) · Engine Valves (inspect valve lash) · Universal Vehicle Operation (inspect idle speed) · Wheel Bearing (inspect) |
| Every 30,000 mi | Accessory Drive Belt (inspect) · Engine Air Filter Element (replace) · Engine Breather Filter (replace) · Engine Coolant System (drain, flush & refill) · Fuel Filter (replace) · Fuel Line (inspect) |
| Every 50,000 mi | EGR System (inspect) · PCV Valve (replace) · Transmission Oil Cooler Line (inspect) |
| Every 60,000 mi | Brake Hydraulic System (drain, refill & bleed) · Distributor Cap (inspect) · Emission Control System (inspect) · Fuel Tank Filler Cap O-Ring (inspect) · Ignition Timing (inspect) · Spark Plug Wires (replace) |
| At 90,000 mi | Timing Belt (inspect) |
| Every 100,000 mi | Fuel Evaporative Canister (replace) · Fuel Injector (clean) · Powertrain Control System Sensors (inspect) |