Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 1982 Ramcharger.
The 1982 Dodge Ramcharger overview frames the vehicle through the fundamental integration of its body, platform, and engine specifications to establish its core identity. Within this configuration, standout specs naturally illustrate its mechanical focus and overall design parameters. Sitting within the model's broader reliability history, this specific year means the Ramcharger reflects the enduring dependability and consistent engineering standards associated with the nameplate.
Engine, drivetrain, dimensions and economy.
| Overall length | 183.9 in |
| Overall width | 79.5 in |
| Overall height | 68.1 in |
| Wheelbase | 105.5 in |
Condensed service procedures for routine maintenance. Procedures that require dealer diagnostic equipment are identified and summarized only.
| Tool required | DRBIII scan tool (dealer / locksmith) |
| Why | Transmitter codes are written into the receiver in the passenger door module |
| When needed | After Sentry Key Immobilizer Module (SKIM) replacement |
| Tool required | DRBIII scan tool |
| Also required | The vehicle's four-digit PIN code |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
Showing 2 of 2 campaigns on record for this vehicle.
VEHICLES ARE NOT IN COMPLIANCE WITH THE IMPACT TEST REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD 301, "FUEL SYSTEM INTEGRITY." THE STRUCTURE OF THE REAR STEP BUMPER MAY NOT WITHSTAND A REAR END COLLISION… Remedy: A FUEL TANK PROTECTIVE SKID PLATE WILL BE INSTALLED FREE OF CHARGE.
CLAMP BOLTS INSTALLED ON CERTAIN VEHICLES MAY CONTAIN CRACKS. EVENTUALLY THESE BOLTS MAY BREAK THROUGH, CAUSING SEPARATION OF THE BALL JOINT FROM THE STEERING KNUCKLE. Remedy: DEALER WILL REPLACE BOTH BALL JOINT STUD CLAMP BOLTS WITHOUT CHARGE TO OWNER.
Showing 1 of 1 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| 9002688 | 2013-02-13 | Engine And Engine Cooling | 68069384A$, R8069384A$, 68086182A$, R8027067A$, RL002012A$ - Gasket, Cylinder Head Cover… |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Cross-vehicle references for the kinds of data on this page.
NHTSA lists 2 recall campaign(s) for this model year. Check your specific vehicle by VIN.