Chevrolet›W-Series MD Tilt Chassis›2000›Overview/chevrolet/w-series-md-tilt-chassis/2000/base/

2000 Chevrolet W-Series MD Tilt Chassis

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2000 W-Series MD Tilt Chassis.

Model year20022000

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

Torque the oil drain plug to 18.0 ft-lbs.

Engine torques

Crankshaft Pulley and/or Damper Bolts74 ft-lbs
Engine Oil Pan Drain Plug18.0 ft-lbs

Service checks

Injector Primary Resistance11.8-12.6 @ 50-95 degreesF MFI ohms
Injector Primary Resistance11.8-12.6 @ 50-95 degreesF ohms
Engine Compression100 Minimum psi
Engine Compression215 Nominal psi
Engine Compression100 Minimum psi
Engine Compression100 Minimum psi

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420
Catalyst system efficiency below threshold — Bank 1
P0300
Random / multiple cylinder misfire detected
P0171
System too lean — Bank 1
P0455
Evaporative emission system leak detected — large leak
P0128
Coolant thermostat below regulating temperature
P0442
Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN
Decode a VIN to confirm the transmission and build data for a specific W-Series MD Tilt Chassis. OEM
Build data
Plant, GVWR class, engine and body data for any 17-character VIN.
Recalls
Check open recall campaigns against a specific vehicle by VIN.

Reference guides

Cross-vehicle references for the kinds of data on this page.

OBD-II trouble codes