Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the coolant every 7,500 mi. The big-interval services (every 7,500 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.
| At 5,000 mi | Tire & Wheel Assembly (rotate) |
| Every 5,000 mi | Brake Hydraulic System (inspect fluid level) · Brake System (inspect) · CV Joint Boot (inspect) · Drive Axle Assembly (drain & refill) · Parking Brake Cable (lubricate) · Parking Brake System (inspect) |
| At 7,500 mi | Drive Axle Assembly (drain & refill) |
| Every 7,500 mi | Brake Line (inspect) · Brake Linings (inspect) · Differential (inspect fluid level) · Drive Axle Assembly (drain & refill) · Driveshaft U-Joint (lubricate) · Engine Coolant System (leak inspection) |
| Every 10,000 mi | Air Intake System (inspect) · Tire & Wheel Assembly (rotate) · Underbody Splash Shield (inspect) |
| Every 12,000 mi | Radiator Fan Assembly (inspect) |
| Every 30,000 mi | Clutch Cross Shaft (lubricate) · Clutch Release Lever Pivot Points (lubricate) · Engine Air Filter Element (replace) · Engine Breather Filter (replace) · Fuel Evaporative Emission Control System (inspect) · Fuel Filter (replace) |
| Every 60,000 mi | Accessory Drive Belt (inspect) · EGR System (inspect) · Exhaust Pressure Regulator (inspect) · Fuel Line (inspect) · Fuel Tank (inspect) · Fuel Tank Filler Cap (inspect) |