Chevrolet›C-Series Kodiak Conventional C6/C7/C8›2007›Overview/chevrolet/c-series-kodiak-conventional-c6-c7-c8/2007/base/

2007 Chevrolet C-Series Kodiak Conventional C6/C7/C8

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2007 C-Series Kodiak Conventional C6/C7/C8.

Model year2007 2003

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

Torque the oil drain plug to 21.0 ft-lbs.

Engine torques

Crankshaft Pulley and/or Damper Bolts	189 ft-lbs
Exhaust Manifold to Cylinder Head Bolts	Bolts: 26 ft-lbs, nuts: 12 ft-lbs
Engine Oil Pan Drain Plug	21.0 ft-lbs

Service checks

Key ON Engine OFF (KOEO)	56-62
Injector Primary Resistance	11-14 @ 50-90 degreesF ohms

Multi-step torque procedures OEM · verified

Intake Manifold to Engine Bolts — tightening sequence 1 stages

1

3.7 ft. lbs., step 2: 5.9 ft. lbs., step 3: 8.8

3.7 ft. lbs

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

Catalyst system efficiency below threshold — Bank 1

Random / multiple cylinder misfire detected

System too lean — Bank 1

Evaporative emission system leak detected — large leak

Coolant thermostat below regulating temperature

Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN

Decode a VIN to confirm the transmission and build data for a specific C-Series Kodiak Conventional C6/C7/C8. OEM

Build data

Plant, GVWR class, engine and body data for any 17-character VIN.

Recalls

Check open recall campaigns against a specific vehicle by VIN.

Reference guides

Cross-vehicle references for the kinds of data on this page.

OBD-II trouble codes Torque specifications