Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
| Every 50,000 mi | Timing Belt (inspect) |
| Every 100,000 mi | Oxygen Sensor (replace) |
Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 1999 Z3 COUPE.
The 1999 BMW Z3 Coupe is built on the E36 platform and features a 4-speed automatic transmission. This model achieves an EPA-rated 17/24/19 mpg and requires 7.0 quarts of oil in 15W-40, 10W-40, or 10W-30 API SJ viscosities. Its reliability history consists of 3 recalls and 39 total owner complaints, which are primarily focused on the air bags.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 48 · 650 CCA battery, OE oil filter 11421730389. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11421730389 alt 11427512300 |
| Engine air filter | 13721730449 |
| Fuel filter | 13321740985 |
| Spark plug | 12129069877 alt 12129071003 |
| Battery | 61217586960 alt 61218381738 |
| Front wiper blades | 61611387678 alt 61619070581 |
| Serpentine belt | 11281437449 alt 11287636379 |
| Thermostat | 11537511580 alt 11537509357 |
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic 4-spd |
| Overall length | 158.7 in |
| Overall width | 66.5 in |
| Overall height | 50.8 in |
| Wheelbase | 96.5 in |
| Curb weight | 2723 lb |
| Track (front / rear) | 55.5 / 55.9 in |
| Weight distribution (front / rear) | 51/49 |
| EPA city / highway / combined | 17 / 24 / 19 mpg |
| Drivetrain | Rear-Wheel Drive |
| Recommended fuel | Regular Gasoline |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 7.0 qt of 15W-40 / 10W-40 / 10W-30 API SJ engine oil, DOT 4 brake fluid. Torque lug nuts to 88 ft-lbs, the oil drain plug to 22.0 ft-lbs. The firing order is 1-5-3-6-2-4. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 3 Pints |
| Engine Coolant | ETHYLENE GLYCOL |
| Engine Oil | 15W-40 · API · 10W-40 · 10W-30 · 5W-30 |
| Engine Oil Capacity | 7.0 qt |
| Engine Oil | 15W-40 · API · 10W-40 · 10W-30 · 5W-30 |
| Engine Oil Capacity | 7.0 qt |
| Engine Oil | 15W-40 · API · 10W-40 · 10W-30 · 5W-30 |
| Engine Flywheel Bolts | AT: 89 ft-lbs, MT: 78 ft-lbs |
| Engine Oil Pan Drain Plug | M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs |
| Engine Oil Pan Drain Plug | 22.0 ft-lbs |
| Oil Pump to Cylinder BLock Bolts/Studs | 16 ft-lbs |
| Lug Nuts | 88 ft-lbs |
| Cylinder Firing Order | 1-5-3-6-2-4 |
| Spark Plug Manufacturer | BMW |
| Refrigerant | R134a |
| Refrigerant Capacity | 1.75-2.26 lbs |
| Oil Group | PAG |
| Oil Type | 46 |
| Standard BCI Group Number | 48 |
| Standard BCI Cranking Performance | 650 cca |
| Standard BCI Group Number | 48 |
| Standard BCI Cranking Performance | 650 cca |
| Pressure Test | 14.5 psi |
| Radiator Cap Pressure Relief | 13-17 psi |
| Thermostat Opening Temperature | 203 °F |
| Pressure Test | 14.5 psi |
| Radiator Cap Pressure Relief | 13-17 psi |
| Thermostat Opening Temperature | 176 °F |
| Injector Primary Resistance | 15-17 ohms |
| Engine Compression | 142-156 psi |
| Brake Application | WITH SOLID ROTOR / WITH VENTED ROTOR |
| Torque Caliper to Bracket | 81 ft-lbs / 18-22 ft-lbs |
| Torque to Knuckle | 81-96 ft-lbs / 81 ft-lbs |
| Brake Application | WITH SOLID ROTOR / WITH VENTED ROTOR |
| Torque Caliper to Bracket | 18-22 ft-lbs |
| Torque to Knuckle | 49 ft-lbs |
| Torque Caliper to Bracket | 81 ft-lbs |
| Torque to Knuckle | 81-96 ft-lbs |
| 1 | 4 ft. lbs., Step 2: 14 ft. lbs., Step 3: 70 | 4 ft. lbs |
| 1 | 29.5 ft. lbs. | 29.5 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | 90 | |
| 1 | 22 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | 90 | |
Normal service, condensed from the factory interval matrix.
| Every 50,000 mi | Timing Belt (inspect) |
| Every 100,000 mi | Oxygen Sensor (replace) |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
The 1999 BMW Z3 Coupe shows complaint concentrations in Air Bags (7), Structure (7), Power Train (6), and Seat Belts (4), though notably with zero crash complaints and zero fire complaints. The year-by-year federal record begins in 2000, limiting direct year-to-year comparison, but the available data reveals an upward trend: complaints rose from 1 in 2000 to 2 in 2001, while TSBs increased from 5 to 8 over the same period. This escalation suggests emerging reliability concerns that may have originated in the 1999 model year. Given that the 1999 model precedes this trend and carries no crash or fire complaints, it represents a relatively stable entry point within this generation's lifecycle. However, the structural and air bag complaint areas warrant pre-purchase inspection, as they indicate potential latent issues that materialized in subsequent model years. This year is moderately favorable for purchase, provided thorough mechanical and structural verification is completed.
All 39 complaints on record, top 8 components.
Source: NHTSA Office of Defects Investigation complaint database.
Showing 2 of 3 campaigns on record for this vehicle.
CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL… Remedy: PRO-A MOTORS WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE LAMPS. THE RECALL BEGAN ON APRIL 3, 2006. OWNERS MAY CONTACT PRO-A MOTORS AT 323-838-2988.
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE REAR AXLE DIFFERENTIAL MAY CONTAIN RING GEAR BOLTS THAT WERE INCORRECTLY TORQUED DURING ASSEMBLY. THE BOLT OR BOLTS COULD LOOSEN LEADING TO NOISE FROM THE DIFFERENTIAL. Remedy: DEALERS WILL INSPECT THE VEHICLE'S DIFFERENTIAL AND IF INVOLVED, WILL REPLACE IT.
Showing 5 of 11 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| SI B12 12 10 | 2010-06-01 | Engine And Engine Cooling | BMW: WHEN AT LOWER SPEEDS OR STOPPING THE ENGINE IDLE DIPS TOO LOW BECAUSE OF A SOFTWARE… |
| 620300 | 2000-06-01 | Electrical System | SUBJECT REGARDING SHORT CIRCUIT CAUSING VARIOUS INSTRUMENT CLUSTER FAULTS. *TT |
| 110500 | 2000-06-01 | Engine And Engine Cooling | EXPERIENCING A BUZZING OR RATTLING NOISE HEARD COMING FROM ENGINE COMPARTMENT. *TT |
| 040600 | 2000-02-01 | Equipment | INFORMATION REGARDING THE DSC III TEST CABLE. *TT |
| 620199 | 1999-06-01 | Fuel System, Other | CONDITIONS WITH FUEL GAUGE READING 1/4 WHEN TANK IS FULL. *TT |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
7.0 qt of HIGH PERFORMANCE MINERAL OILS: ABOVE 5 degrees F: 15W-40 API SJ, SL OR SM, -5 degreesF TO 68 degrees F: 10W-40 API SJ, SL OR SM, 5 degreesF TO 50 degrees F: 10W-30 API SJ, SL OR SM, BELOW 50 degrees F: 5W-30 API SJ, SL OR SM, BELOW 32 degrees F:, per the factory manual.
NHTSA lists 3 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 17 city / 24 highway / 19 combined mpg.