BMWX5 35DX2010Overview/bmw/x5-35dx/2010/base/
E70 platform

2010 BMW X5 35DX

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2010 X5 35DX.

Body SUVTransmission Automatic (S6)

The 2010 BMW X5 35DX is an E70-platform SUV equipped with an automatic S6 transmission, delivering EPA-rated fuel economy of 15 mpg city, 21 highway, and 18 combined. Its engine oil capacity stands at 6.9 quarts, with recommended viscosities including 15W-40, 10W-40, and 10W-30 API SJ. This model year sits among the more problematic in the X5’s history, recording 147 owner complaints—predominantly engine-related—and 22 recalls, signaling a reliability record that warrants careful consideration.

Model year20132012201120102009

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity6.9 qtOEM · verified
Engine oil type15W-40 / 10W-40 / 10W-30 API SJOEM · verified
Lug nut torque103 ft-lbsOEM · verified
EPA fuel economy15/21/18 mpgEPA · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses a BCI 49 · 900 CCA battery, OE oil filter 11428683168. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Battery groupBCI 49 · 900 CCAOEM · verified

OE service part numbers OEM · verified

Engine oil filter11428683168 alt 11427542021
Engine air filter13717798342 alt 13717589642
Fuel filter13327822499
Spark plug12122158252 alt 12120037663
Battery61217594976
Front wiper blades61610077821
Thermostat11517787692 alt 11538632664
Cabin air filter64319194098 alt 64316804939

Full specifications

Engine, drivetrain, dimensions and economy.

Engine & drivetrain NHTSA vPIC

TransmissionAutomatic (S6)

Dimensions & weight NHTSA vPIC

Overall length190.9 in
Overall width76 in
Overall height69.7 in
Wheelbase115.4 in
Curb weight4916 lb
Track (front / rear)64.6 / 65 in
Weight distribution (front / rear)48/52

Ratings & economy EPA / vPIC

EPA city / highway / combined15 / 21 / 18 mpg
DrivetrainAll-Wheel Drive
Recommended fuelPremium Gasoline

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine holds 6.9 qt of 15W-40 / 10W-40 / 10W-30 API SJ engine oil, DOT 4 brake fluid. Torque lug nuts to 103 ft-lbs, the oil drain plug to M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs. The firing order is 1-5-4-8-6-3-7-2. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.

Lubricants & capacities

Automatic Transmission FluidBMW part number 83222152426
Automatic Transmission Fluid Capacity10.5-11.5
Brake FluidDOT 4
Differential Gear Oil Capacity1.5 Pints
Differential Gear Oil Capacity1.9 Pints
Engine CoolantETHYLENE GLYCOL
Engine Oil15W-40 · API · 10W-40 · 10W-30 · 5W-30
Engine Oil Capacity6.9 qt

Engine torques

Crankshaft Pulley and/or Damper Bolts18 ft-lbs
Intake Manifold to Engine BoltsM6 bolts: 6 ft-lbs, M7 nuts: 9.6 ft-lbs
Exhaust Manifold to Cylinder Head Bolts15 ft-lbs
Intake Manifold to Engine Bolts11 ft-lbs
Intake Manifold to Engine Bolts11 ft-lbs
Engine Oil Pan Drain PlugM12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs

Chassis torques

Lug Nuts103 ft-lbs
Transfer Case Fill Plug24.0 ft-lbs
Transfer Case Drain Plug24.0 ft-lbs
Front Wheel Hub310 ft-lbs
Rear Wheel Hub310 ft-lbs

Ignition

Cylinder Firing Order1-5-3-6-2-4
Cylinder Firing Order1-5-4-8-6-3-7-2
Spark Plug ManufacturerBMW

Battery & A/C

RefrigerantR134a
Oil GroupPAG
Oil Type46
Standard BCI Group Number49
Standard BCI Cranking Performance900 cca
Optional BCI Group Number48
Optional BCI Cranking Performance570 cca
Standard BCI Group Number49

Service checks

Pressure Test21.7 psi
Pressure Test29 psi
Radiator Cap Pressure Relief26-30 psi
Pressure Test29 psi
Radiator Cap Pressure Relief26-30 psi

Brakes

Minimum Pad ThicknessFront: 0.145; Rear: 0.145 pads

Multi-step torque procedures OEM · verified

Crankshaft Pulley and/or Damper Bolts — tightening sequence 1 stages
130 ft. lbs., step 2: 12030 ft. lbs
Crankshaft Pulley and/or Damper Bolts — tightening sequence 1 stages
173 ft. lbs., step 2: 60 degrees, step 3: 60 degrees, step 4: 6073 ft. lbs
Cylinder Head — tightening sequence 5 stages

Prep Do not reuse old bolts. Coat new bolts with the specified engine oil.

159.0 ft. lbs.59 ft. lbs
2loosen all bolts 180 degrees starting from the outside working to the inside.180 degrees
337.0 ft. lbs.37 ft. lbs
490 degrees90 degrees
590 degrees90 degrees
Cylinder Head — tightening sequence 4 stages

Prep Do not reuse old bolts

122.0 ft. lbs.22 ft. lbs
290 degrees90 degrees
3Bolts 1-10 90 degrees90 degrees
445 degrees45 degrees
Exhaust Manifold to Cylinder Head Bolts — tightening sequence 1 stages
17 ft. lbs., Step 2: 11 ft. lbs., Step 157 ft. lbs

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the spark plugs every 60,000 mi.

Every 60,000 miSpark Plugs (replace)
Every 100,000 miTransmission Assembly (drain & refill)
At 150,000 miOxygen Sensor (replace)

Reliability & federal safety record

Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.

Owner complaints about the 2010 BMW X5 35DX top in one area — the engine, 23 of 147 reports (16%), well ahead of the next concern. That matters, because the engine are also the target of recall 18V-248 on this vehicle — so the single most useful check before buying or servicing one is confirming it was actually performed. 2 of the reports describe a crash and 6 a fire — a small share of the total, but worth weighing against the engine pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.

22
Open recalls
NHTSA campaigns
335
Service bulletins
Manufacturer communications
2
ODI investigations
Office of Defects Investigation
147
Owner complaints
2 involved a crash · 6 a fire
NHTSA crash-test rating federal NCAP · out of 5 stars
Rollover★★★★

Owner complaints filed with NHTSA, by component

All 147 complaints on record, top 8 components.

Engine23
Air Bags23
Engine & Engine Cooling11
Fuel/Propulsion System8
Unknown Or Other7
Air Bags,Fuel/Propulsion System7
Electrical System6
Steering,Electrical System,Engine4

Source: NHTSA Office of Defects Investigation complaint database.

Recalls NHTSA · verified

Showing 2 of 14 campaigns on record for this vehicle.

19V017000Air Bags:Frontal:Passenger Side:Inflator ModuleReported 14/01/2019

BMW of North America, LLC (BMW) is recalling certain 2007-2013 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5 M vehicles, 2008-2014 X6 xDrive35i, X6 xDrive50i and X6 M vehicles, 2009-2013 X5 xDrive35d… Remedy: Owners are advised not to drive their vehicles until the remedy is performed. BMW will notify owners, and dealers will replace the passenger frontal air bag module, free of…

18V248000Engine And Engine Cooling:Engine:Gasoline:Turbo/SuperchargerReported 18/04/2018

BMW of North America, LLC (BMW) is recalling certain 2011-2012 BMW 550i, 550i xDrive, 550i Gran Turismo, 550i Gran Turismo xDrive, 750i, 750Li, 750i xDrive, 750Li xDrive, 760Li, X5 xDrive50i, X5 M, X6 xDrive50i, X6 M… Remedy: BMW will notify owners, and dealers will replace the electric auxiliary water pump, free of charge. Depending on the model, there are currently limited parts available, however…

Technical service bulletins NHTSA · verified

Showing 5 of 335 bulletins on record with NHTSA.

BulletinDateComponentSummary
B0120162026-05-06Electrical SystemThe Footwell Module (FRM) limited warranty for defects in materials and / or workmanship…
B6110262026-04-23Electrical SystemWhile performing a 12-Volt battery jump start, disconnect, or replacement, Vehicle test…
B0664252025-12-01EngineGasket Return
B1106142025-03-27EngineThis bulletin outlines the Customer Care Package program that has been designed…
B0120162025-03-13Electrical SystemThe Footwell Module (FRM) limited warranty for defects in materials and / or workmanship…

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420
Catalyst system efficiency below threshold — Bank 1
P0300
Random / multiple cylinder misfire detected
P0171
System too lean — Bank 1
P0455
Evaporative emission system leak detected — large leak
P0128
Coolant thermostat below regulating temperature
P0442
Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN
Decode a VIN to confirm the transmission and build data for a specific X5 35DX. OEM
Build data
Plant, GVWR class, engine and body data for any 17-character VIN.
Recalls
Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Reference guides

Cross-vehicle references for the kinds of data on this page.

Frequently asked

How much oil does the 2010 X5 35DX take?

6.9 qt of HIGH PERFORMANCE MINERAL OILS: ABOVE 5 degrees F: 15W-40 API SJ, SL OR SM, -5 degreesF TO 68 degrees F: 10W-40 API SJ, SL OR SM, 5 degreesF TO 50 degrees F: 10W-30 API SJ, SL OR SM, BELOW 50 degrees F: 5W-30 API SJ, SL OR SM, BELOW 32 degrees F:, per the factory manual.

Does the 2010 X5 35DX have open recalls?

NHTSA lists 22 recall campaign(s) for this model year. Check your specific vehicle by VIN.

What gas mileage does the X5 35DX get?

EPA figures are 15 city / 21 highway / 18 combined mpg.