Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2013 M6 Coupe.
The 2013 BMW M6 Coupe, built on the F06 platform, is a passenger car that requires 9.0 quarts of engine oil with a viscosity of 0W-30, 0W-40, or 5W-30, and it achieves EPA fuel economy of 14 city, 20 highway, and 16 combined mpg through its automatic AM-S7 transmission. With two total owner complaints—the top area being the engine—and two recalls, this model year sits early in the vehicle’s reliability history, indicating that researchers should note these initial issues as a baseline for later years.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 49 · 900 CCA battery, OE oil filter 11427848321. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11427848321 |
| Engine air filter | 13727843283 alt 13727843284 |
| Spark plug | 12120039634 |
| Battery | 61217648317 alt 61217639053 |
| Front wiper blades | 61612458020 |
| Thermostat | 11538632664 alt 11537586885 |
| Cabin air filter | 64119272642 |
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic (AM-S7) |
| Overall length | 192.5 in |
| Overall width | 74.4 in |
| Overall height | 53.9 in |
| Wheelbase | 112.6 in |
| Curb weight | 4255 lb |
| Track (front / rear) | 63 / 65.7 in |
| Weight distribution (front / rear) | 53/47 |
| EPA city / highway / combined | 14 / 20 / 16 mpg |
| Drivetrain | Rear-Wheel Drive |
| Recommended fuel | Premium Gasoline |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 9.0 qt of 0W-30 / 0W-40 / 5W-30 engine oil. Torque lug nuts to 103 ft-lbs, the oil drain plug to M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs. The firing order is 1-5-4-8-6-3-7-2. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Differential Gear Oil Capacity | 2 Pints |
| Engine Oil | 0W-30 · 0W-40 · 5W-30 · 5W-40 |
| Engine Oil Capacity | 9.0 qt |
| Power Steering Fluid | Use Pentosin CHF 11S |
| Intake Manifold to Engine Bolts | 11 ft-lbs |
| Engine Oil Pan Drain Plug | M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs |
| Lug Nuts | 103 ft-lbs |
| Cylinder Firing Order | 1-5-4-8-6-3-7-2 |
| Spark Plug Manufacturer | BMW |
| Refrigerant | R134a |
| Oil Group | PAG |
| Oil Type | 46 |
| Standard BCI Group Number | 49 |
| Standard BCI Cranking Performance | 900 cca |
| Optional BCI Group Number | 49 |
| Optional BCI Cranking Performance | 850 cca |
| Engine Compression | 203-261 PSI. 29 maximum variance. psi |
| Brake Application | WITH FN3 |
| Torque to Knuckle | 81 ft-lbs |
| Minimum Pad Thickness | Front: 0.145; Rear: 0.145 pads |
| Brake Application | WITH FN3 |
| Rotor Nominal Thickness From | 0.945 in |
| Rotor Nominal Thickness To | 0.945 in |
| Rotor Minimum Machining | 0.031 in |
| Rotor Discard at or Under | 0.882 in |
| 1 | 73 ft. lbs., step 2: 60 degrees, step 3: 60 degrees, step 4: 60 | 73 ft. lbs |
Prep Do not reuse old bolts
| 1 | 22.0 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | 90 degrees | 90 degrees |
| 1 | Screw in guide tool 01 19 11 (742) at position 3 and 4 | 7 ft. lbs |
| 5 | Tighten all screws | 11 ft. lbs |
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the engine oil and filter at 1,200 mi.
| At 1,200 mi | Drive Axle Assembly (drain & refill) · Engine Oil (drain & refill) · Engine Oil Filter (replace) |
| At 120,000 mi | Oxygen Sensor (replace) |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
Owner complaints about the 2013 BMW M6 Coupe - F06 dominate in one area — the engine, 1 of 2 reports (50%), well ahead of the next concern. That matters, because the engine are also the target of recall 12V-475 on this vehicle — so the single most useful check before buying or servicing one is confirming it was actually performed. 0 of the reports describe a crash and 0 a fire — a small share of the total, but worth weighing against the engine pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.
All 2 complaints on record, top 2 components.
Source: NHTSA Office of Defects Investigation complaint database.
Showing 2 of 2 campaigns on record for this vehicle.
BMW of North America, LLC. (BMW) is recalling certain 2012-2013 BMW X3 xDrive28i, X3 xDrive35i, and M6 Convertible vehicles and 2013 M6 Coupe vehicles. The affected vehicles have a driver's frontal air bag inflator that… Remedy: BMW will notify owners, and dealers will replace the driver's front air bag module, free of charge. The recall began October 6, 2017. Owners may contact BMW customer service at…
BMW is recalling certain model year 2013 M5, M6 Coupe, and M6 Convertible vehicles, manufactured from July 19, 2012, through September 11, 2012. Due to a manufacturing process error, the tolerance between the engine oil… Remedy: BMW will notify owners, and dealers will replace the oil pump, free of charge. The safety recall began on November 30, 2012. Owners may contact BMW at 1-800-525-7417.
Showing 5 of 354 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| B611305 | 2024-01-11 | Electrical System | The electrical system of BMW vehicles has been subject to an ongoing development process… |
| B340714 | 2023-10-13 | Service Brakes, Hydraulic | Functional noises (squealing/honking) when braking shortly before the vehicle comes to a… |
| B340914 | 2023-06-01 | Wheels | The Dynamic Stability Control (DSC) warning light comes on while driving. The following… |
| B651523 | 2023-05-01 | Electrical System | After programming the head unit (HU-H2), activating the FSC (German word Freischaltcode)… |
| B010122 | 2022-12-01 | Equipment | With the court's FINAL approval, BMW of North America, LLC (BMW NA) has entered into a… |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
9.0 qt of 0W-30, 0W-40, 5W-30, 5W-40 OIL MEETING BMW SPECIFICATION LL01, per the factory manual.
NHTSA lists 2 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 14 city / 20 highway / 16 combined mpg.