Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2011 750i xDrive Alpina B7 Sedan B7.
The 2011 BMW 750i xDrive Alpina B7 Sedan is built on the F01 platform and houses Alpina’s B7 engine, paired with an automatic S6 transmission. It carries a relatively generous 9.0‑quart oil capacity and runs on 15W‑40, 10W‑40 or 10W‑30 oil to the API SJ specification, while achieving an EPA rating of 14 mpg city, 20 mpg highway and 16 mpg combined. In the reliability record for this generation, owners reported only 16 total complaints, with the engine being the most frequent issue area, and the model experienced two recalls. This modest complaint volume places the 2011 B7 in a middle‑of‑the‑road reliability tier for the Alpina‑tuned 7‑Series, suggesting that while it is generally dependable, prospective owners should be aware of the engine‑focused service history.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 49 · 900 CCA battery. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic (S6) |
| Overall length | 199.6 in |
| Overall width | 74.8 in |
| Overall height | 58.3 in |
| Wheelbase | 120.9 in |
| Curb weight | 4718 lb |
| Track (front / rear) | 63.4 / 64.2 in |
| Weight distribution (front / rear) | 50/50 |
| EPA city / highway / combined | 14 / 20 / 16 mpg |
| Drivetrain | All-Wheel Drive |
| Passenger volume | 106 cu ft |
| Cargo volume | 14 cu ft |
| Recommended fuel | Premium Gasoline |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 9.0 qt of 15W-40 / 10W-40 / 10W-30 API SJ engine oil, DOT 4 brake fluid. Torque lug nuts to 103 ft-lbs, the oil drain plug to M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs. The firing order is 1-5-4-8-6-3-7-2. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Automatic Transmission Fluid | BMW part number 83222152426 |
| Automatic Transmission Fluid Capacity | 10.5-11.5 |
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 1.2 Pints |
| Differential Gear Oil Capacity | 1.8 Pints |
| Engine Coolant | ETHYLENE GLYCOL |
| Engine Oil | 15W-40 · API · 10W-40 · 10W-30 · 5W-30 |
| Engine Oil Capacity | 9.0 qt |
| Engine Oil Pan Drain Plug | M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs |
| Lug Nuts | 103 ft-lbs |
| Cylinder Firing Order | 1-5-4-8-6-3-7-2 |
| Spark Plug Manufacturer | BMW |
| Refrigerant | R134a |
| Oil Group | PAG |
| Standard BCI Group Number | 49 |
| Standard BCI Cranking Performance | 900 cca |
| Optional BCI Group Number | 49 |
| Optional BCI Cranking Performance | 850 cca |
| Engine Compression | 203-232 PSI. 29 maximum variation. psi |
| Minimum Pad Thickness | Front: 0.145; Rear: 0.145 pads |
| 1 | 73 ft. lbs., step 2: 60 degrees, step 3: 60 degrees, step 4: 60 | 73 ft. lbs |
Prep Do not reuse old bolts
| 1 | 22.0 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | 90 degrees | 90 degrees |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
Owner complaints about the 2011 BMW 750i xDrive Alpina B7 Sedan dominate in one area — the engine, 6 of 16 reports (38%), well ahead of the next concern. NHTSA has issued no recalls for this vehicle, so these are owner-reported concerns only. 0 of the reports describe a crash and 1 a fire — a small share of the total, but worth weighing against the engine pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.
All 16 complaints on record, top 8 components.
Source: NHTSA Office of Defects Investigation complaint database.
No recall campaigns on record with NHTSA for this vehicle as of the last data refresh.
Showing 5 of 355 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| B110614 | 2025-03-27 | Engine | This bulletin outlines the Customer Care Package program that has been designed… |
| B650425 | 2025-02-20 | Air Bags | Vehicle has the air bag warning lamp on after a body shop has made repairs. There is a… |
| B510819 | 2024-01-16 | Electrical System | The basic conditions for initializing the power windows are not met. |
| B611305 | 2024-01-11 | Electrical System | The electrical system of BMW vehicles has been subject to an ongoing development process… |
| B160623 | 2023-12-20 | Engine And Engine Cooling | Engine will crank but not start. There is no communication with the integrated fuel… |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
9.0 qt of HIGH PERFORMANCE MINERAL OILS: ABOVE 5 degrees F: 15W-40 API SJ, SL OR SM, -5 degreesF TO 68 degrees F: 10W-40 API SJ, SL OR SM, 5 degreesF TO 50 degrees F: 10W-30 API SJ, SL OR SM, BELOW 50 degrees F: 5W-30 API SJ, SL OR SM, BELOW 32 degrees F:, per the factory manual.
NHTSA lists 2 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 14 city / 20 highway / 16 combined mpg.