Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
| At 150,000 mi | Oxygen Sensor (replace) |
Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2014 740Li.
The 2014 BMW 740Li is a passenger car equipped with an automatic transmission (S8) and achieving EPA fuel economy of 19 city/28 highway/22 combined mpg. Its engine requires 6.9 quarts of oil with a viscosity range of 0W-30, 0W-40, or 5W-30. With only 3 owner complaints—the most common concerning wheels—and a single recall, this model year falls in the middle of the 2011–2016 generation's reliability spectrum, which saw a peak of 14 complaints in 2011 and a low of 1 in 2015, suggesting a relatively trouble-free ownership experience compared to earlier years.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 49 · 900 CCA battery, OE oil filter 11428683168. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11428683168 alt 11428637820 |
| Engine air filter | 13717571355 |
| Spark plug | 12120037582 |
| Battery | 61217639053 |
| Front wiper blades | 61612147361 |
| Thermostat | 11538671514 |
| Cabin air filter | 64319175484 alt 64116809933 |
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic (S8) |
| Overall length | 205.1 in |
| Overall width | 74.8 in |
| Overall height | 58.3 in |
| Wheelbase | 126.4 in |
| Curb weight | 4526 lb |
| Track (front / rear) | 63.4 / 64.2 in |
| Weight distribution (front / rear) | 50/50 |
| EPA city / highway / combined | 19 / 28 / 22 mpg |
| Drivetrain | Rear-Wheel Drive |
| Passenger volume | 115 cu ft |
| Cargo volume | 14 cu ft |
| Recommended fuel | Premium Gasoline |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 6.9 qt of 0W-30 / 0W-40 / 5W-30 engine oil, DOT 4 brake fluid. Torque lug nuts to 103 ft-lbs, the oil drain plug to M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs. The firing order is 1-5-3-6-2-4. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Automatic Transmission Fluid | BMW part number 83222152426 |
| Automatic Transmission Fluid Capacity | 10.5-11.5 |
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 1.7 Pints |
| Engine Oil | 0W-30 · 0W-40 · 5W-30 · 5W-40 |
| Engine Oil Capacity | 6.9 qt |
| Power Steering Fluid | Use Pentosin CHF 11S |
| Engine Oil Pan Drain Plug | M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs |
| Lug Nuts | 103 ft-lbs |
| Cylinder Firing Order | 1-5-3-6-2-4 |
| Spark Plug Manufacturer | BMW |
| Refrigerant | R134a |
| Standard BCI Group Number | 49 |
| Standard BCI Cranking Performance | 900 cca |
| Optional BCI Group Number | 49 |
| Optional BCI Cranking Performance | 850 cca |
| Pressure Test | 21.7 psi |
| Radiator Cap Pressure Relief | 28-32 psi |
| Engine Compression | 145-232 psi |
| Brake Application | WITH FN3 |
| Torque to Knuckle | 81 ft-lbs |
| Minimum Pad Thickness | Front: 0.145; Rear: 0.145 pads |
| Brake Application | WITH FN3 |
| Rotor Nominal Thickness From | 1.181 in / 0.787 in / 0.945 in / 1.417 in |
| Rotor Nominal Thickness To | 1.181 in / 0.787 in / 0.945 in / 1.417 in |
| Rotor Minimum Machining | 0.031 in |
| Rotor Discard at or Under | 1.087 in / 0.692 in / 0.882 in / 1.354 in |
| 1 | 15 ft. lbs., Step 2: 140 | 15 ft. lbs |
Prep Do not reuse old bolts
| 1 | 22.0 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | Bolts 1-10 90 degrees | 90 degrees |
| 4 | 45 degrees | 45 degrees |
| 1 | 15 ft. lbs., Step 2: 70 | 15 ft. lbs |
Normal service, condensed from the factory interval matrix.
| At 150,000 mi | Oxygen Sensor (replace) |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
The federal record indicates a consistent downward trend in consumer complaints for this generation, falling from 14 incidents in 2011 to just 1 by 2015 and 2016. The 2014 model year sits favorably within this improvement arc, recording only 3 complaints and 1 recall, which is less than half the volume reported for the 2012 and 2013 model years. While Technical Service Bulletins number 257 for this specific year, the federal complaints are limited to single incidents regarding wheels, seat belts, and air bags, with zero fire complaints registered. This reduction suggests that issues prevalent in the early years of the generation were largely addressed by the 2014 production cycle. Given the significantly lower complaint volume relative to the 2011-2013 period, the 2014 740Li represents a statistically stronger choice for used buyers seeking reliability within this chassis.
All 3 complaints on record, top 3 components.
Source: NHTSA Office of Defects Investigation complaint database.
Showing 1 of 1 campaigns on record for this vehicle.
BMW of North America, LLC (BMW) is recalling certain 2013-2015 740i, 740Li, 740Lxi, 750i, 750xi, 750Li and 750Lxi and 2014 ActiveHybrid 7 vehicles. The affected vehicles may have received incorrect replacement left rear… Remedy: BMW will notify owners, and dealers will inspect the vehicles and replace any incorrect left rear taillight assemblies, free of charge. The recall began August 11, 2017. Owners…
Showing 5 of 257 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| B510819 | 2024-01-16 | Electrical System | The basic conditions for initializing the power windows are not met. |
| B611305 | 2024-01-11 | Electrical System | The electrical system of BMW vehicles has been subject to an ongoing development process… |
| B160623 | 2023-12-20 | Engine And Engine Cooling | Engine will crank but not start. There is no communication with the integrated fuel… |
| B653423 | 2023-11-22 | Electrical System | Customers may state that the alarm system (DWA) is not active after locking their… |
| B631323 | 2023-11-09 | Electrical System | The carpet welcome light(s) turns on either after a delay, or does not function at all. |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
6.9 qt of 0W-30, 0W-40, 5W-30, 5W-40 OIL MEETING BMW SPECIFICATION LL01, per the factory manual.
NHTSA lists 1 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 19 city / 28 highway / 22 combined mpg.