Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
| At 150,000 mi | Oxygen Sensor (replace) |
Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2014 740Li xDrive.
The 2014 BMW 740Li xDrive is a passenger car pairing BMW's xDrive all-wheel-drive layout with an eight-speed automatic transmission (S8) and an engine that takes 6.9 quarts of oil at service, accepting 0W-30, 0W-40, or 5W-30 viscosity grades. EPA fuel economy registers at 19 mpg city, 28 mpg highway, and 22 mpg combined—respectable figures for a full-size luxury sedan carrying all-wheel drive. On the reliability front, this model year carries just three total owner complaints and a single recall on record, with wheels being the most frequently cited complaint area—a relatively quiet ledger that suggests fewer systemic headaches than is typical for luxury flagships of this vintage.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 49 · 900 CCA battery, OE oil filter 11428683168. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11428683168 alt 11428637820 |
| Engine air filter | 13717571355 |
| Spark plug | 12120037582 |
| Battery | 61217639053 |
| Front wiper blades | 61612147361 |
| Thermostat | 11538671514 |
| Cabin air filter | 64319175484 alt 64119272642 |
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic (S8) |
| Overall length | 205.1 in |
| Overall width | 74.8 in |
| Overall height | 58.3 in |
| Wheelbase | 126.4 in |
| Curb weight | 4526 lb |
| Track (front / rear) | 63.4 / 64.2 in |
| Weight distribution (front / rear) | 50/50 |
| EPA city / highway / combined | 19 / 28 / 22 mpg |
| Drivetrain | All-Wheel Drive |
| Passenger volume | 115 cu ft |
| Cargo volume | 14 cu ft |
| Recommended fuel | Premium Gasoline |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 6.9 qt of 0W-30 / 0W-40 / 5W-30 engine oil, DOT 4 brake fluid. Torque lug nuts to 103 ft-lbs, the oil drain plug to M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs. The firing order is 1-5-3-6-2-4. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Automatic Transmission Fluid | BMW part number 83222152426 |
| Automatic Transmission Fluid Capacity | 10.5-11.5 |
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 1.2 Pints |
| Differential Gear Oil Capacity | 2.5 Pints |
| Engine Oil | 0W-30 · 0W-40 · 5W-30 · 5W-40 |
| Engine Oil Capacity | 6.9 qt |
| Power Steering Fluid | Use Pentosin CHF 11S |
| Engine Oil Pan Drain Plug | M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs |
| Lug Nuts | 103 ft-lbs |
| Cylinder Firing Order | 1-5-3-6-2-4 |
| Spark Plug Manufacturer | BMW |
| Refrigerant | R134a |
| Standard BCI Group Number | 49 |
| Standard BCI Cranking Performance | 900 cca |
| Optional BCI Group Number | 49 |
| Optional BCI Cranking Performance | 850 cca |
| Pressure Test | 21.7 psi |
| Radiator Cap Pressure Relief | 28-32 psi |
| Engine Compression | 145-232 psi |
| Brake Application | WITH FN3 |
| Torque to Knuckle | 81 ft-lbs |
| Minimum Pad Thickness | Front: 0.145; Rear: 0.145 pads |
| Brake Application | WITH FN3 |
| Rotor Nominal Thickness From | 1.181 in / 0.787 in / 0.945 in / 1.417 in |
| Rotor Nominal Thickness To | 1.181 in / 0.787 in / 0.945 in / 1.417 in |
| Rotor Minimum Machining | 0.031 in |
| Rotor Discard at or Under | 1.087 in / 0.692 in / 0.882 in / 1.354 in |
| 1 | 15 ft. lbs., Step 2: 140 | 15 ft. lbs |
Prep Do not reuse old bolts
| 1 | 22.0 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | Bolts 1-10 90 degrees | 90 degrees |
| 4 | 45 degrees | 45 degrees |
| 1 | 15 ft. lbs., Step 2: 70 | 15 ft. lbs |
Normal service, condensed from the factory interval matrix.
| At 150,000 mi | Oxygen Sensor (replace) |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
The federal record for the 2014 BMW 740Li xDrive shows three complaints and one recall, which represents a higher complaint volume compared to the 2015 model year that recorded just one complaint and the same single recall. Furthermore, the 2014 model carries a notably higher count of Technical Service Bulletins at 257 versus 208 for the 2015, indicating the target year required more manufacturer service refinements. The 2014 complaints are evenly distributed across the wheels, seat belts, and air bags categories, with one crash-related complaint and zero fire complaints, though the data does not specify the underlying root causes. Within this short generational arc, the 2014 model sits at the peak for both reported complaints and TSBs, implying it carries more operational quirks than its immediate successor. Given the reduced service complexity and fewer reported issues in the following model year, buyers should consider skipping the 2014 in favor of the 2015 for a more trouble-free ownership experience.
All 3 complaints on record, top 3 components.
Source: NHTSA Office of Defects Investigation complaint database.
No recall campaigns on record with NHTSA for this vehicle as of the last data refresh.
Showing 5 of 257 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| B510819 | 2024-01-16 | Electrical System | The basic conditions for initializing the power windows are not met. |
| B611305 | 2024-01-11 | Electrical System | The electrical system of BMW vehicles has been subject to an ongoing development process… |
| B160623 | 2023-12-20 | Engine And Engine Cooling | Engine will crank but not start. There is no communication with the integrated fuel… |
| B653423 | 2023-11-22 | Electrical System | Customers may state that the alarm system (DWA) is not active after locking their… |
| B631323 | 2023-11-09 | Electrical System | The carpet welcome light(s) turns on either after a delay, or does not function at all. |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
6.9 qt of 0W-30, 0W-40, 5W-30, 5W-40 OIL MEETING BMW SPECIFICATION LL01, per the factory manual.
NHTSA lists 1 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 19 city / 28 highway / 22 combined mpg.