BMW735I - E321989Overview/bmw/735i-e32/1989/base/
E32 platform

1989 BMW 735I - E32

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 1989 735I - E32.

Transmission Automatic 4-spd

The 1989 BMW 735I, built on the E32 platform, requires 6.1 quarts of oil with viscosities ranging from 15W‑40 to 10W‑30 API SJ. It is rated at 14/18/15 mpg and mates with a four‑speed automatic transmission. With only eleven owner complaints logged—most frequently concerning the engine and cooling system—and a single recall on record, this model year occupies a relatively trouble‑free niche in the 735I's reliability history.

Model year19911990198919881987

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity6.1 qtOEM · verified
Engine oil type15W-40 / 10W-40 / 10W-30 API SJOEM · verified
EPA fuel economy14/18/15 mpgEPA · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses OE oil filter 11429063138. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

OE service part numbers OEM · verified

Engine oil filter11429063138
Engine air filter13721707021
Fuel filter13321268231
Spark plug12129061869
Front wiper blades61618217706 alt 61610134601
Serpentine belt11231709638 alt 11231711090
Thermostat11531710953 alt 11531265084

Full specifications

Engine, drivetrain, dimensions and economy.

Engine & drivetrain NHTSA vPIC

TransmissionAutomatic 4-spd

Dimensions & weight NHTSA vPIC

Overall length197.6 in
Overall width151.6 in
Overall height55.5 in
Wheelbase116.1 in
Curb weight4012 lb
Track (front / rear)52.4 / 61 in

Ratings & economy EPA / vPIC

EPA city / highway / combined14 / 18 / 15 mpg
DrivetrainRear-Wheel Drive
Passenger volume101 cu ft
Cargo volume13 cu ft
Recommended fuelRegular Gasoline

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine holds 6.1 qt of 15W-40 / 10W-40 / 10W-30 API SJ engine oil, GL-5 in the differential, DOT 4 brake fluid.

Lubricants & capacities

Brake FluidDOT 4
Differential Gear OilGL-5
Differential Gear Oil Capacity4.9 Pints
Engine CoolantETHYLENE GLYCOL
Engine Oil15W-40 · API · 10W-40 · 10W-30 · 5W-30
Engine Oil Capacity6.1 qt
Power Steering FluidATF

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Every 50,000 miOxygen Sensor (replace)

Reliability & federal safety record

Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.

Owner complaints about the 1989 BMW 735I - E32 dominate in one area — the engine & engine cooling, 4 of 11 reports (36%), well ahead of the next concern. That matters, because the engine & engine cooling are also the target of recall 98V-178 on this vehicle — so the single most useful check before buying or servicing one is confirming it was actually performed. 0 of the reports describe a crash and 0 a fire — a small share of the total, but worth weighing against the engine & engine cooling pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.

1
Open recalls
NHTSA campaigns
1
Service bulletins
Manufacturer communications
0
ODI investigations
Office of Defects Investigation
11
Owner complaints
0 involved a crash · 0 a fire

Owner complaints filed with NHTSA, by component

All 11 complaints on record, top 5 components.

Engine & Engine Cooling4
Electrical System2
Engine & Engine Cooling,Electrical System2
Service Brakes, Hydraulic2
Engine & Engine Cooling,Visibility1

Source: NHTSA Office of Defects Investigation complaint database.

Recalls NHTSA · verified

Showing 1 of 1 campaigns on record for this vehicle.

98V178000Engine And Engine Cooling:Cooling SystemReported 04/08/1998

VEHICLE DESCRIPTION: PASSENGER VEHICLES. A MALFUNCTION OR FAILURE OF A COOLANT SYSTEM COMPONENT, SUCH AS A THERMOSTAT, WATER PUMP, OR FAN BELT, CAN RESULT IN SIGNIFICANTLY INCREASED COOLANT TEMPERATURE AND SYSTEM… Remedy: DEALERS WILL INSTALL A NEW DESIGN RADIATOR CAP TO CONTROL PRESSURE AND PROVIDE GREATER COOLANT OVERFLOW IN THE EVENT OF OVERHEATING.

Technical service bulletins NHTSA · verified

Showing 1 of 1 bulletins on record with NHTSA.

BulletinDateComponentSummary
B5108192024-01-16Electrical SystemThe basic conditions for initializing the power windows are not met.

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420
Catalyst system efficiency below threshold — Bank 1
P0300
Random / multiple cylinder misfire detected
P0171
System too lean — Bank 1
P0455
Evaporative emission system leak detected — large leak
P0128
Coolant thermostat below regulating temperature
P0442
Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN
Decode a VIN to confirm the transmission and build data for a specific 735I - E32. OEM
Build data
Plant, GVWR class, engine and body data for any 17-character VIN.
Recalls
Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Reference guides

Cross-vehicle references for the kinds of data on this page.

Frequently asked

How much oil does the 1989 735I - E32 take?

6.1 qt of HIGH PERFORMANCE MINERAL OILS: ABOVE 5 degrees F: 15W-40 API SJ, SL OR SM, -5 degreesF TO 68 degrees F: 10W-40 API SJ, SL OR SM, 5 degreesF TO 50 degrees F: 10W-30 API SJ, SL OR SM, BELOW 50 degrees F: 5W-30 API SJ, SL OR SM, BELOW 32 degrees F:, per the factory manual.

Does the 1989 735I - E32 have open recalls?

NHTSA lists 1 recall campaign(s) for this model year. Check your specific vehicle by VIN.

What gas mileage does the 735I - E32 get?

EPA figures are 14 city / 18 highway / 15 combined mpg.