Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
| At 150,000 mi | Oxygen Sensor (replace) |
Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2013 640i Convertible.
The 2013 BMW 640i Convertible is a passenger car built on the F12 platform, its engine requiring 6.8 quarts of oil in viscosities of 0W-30, 0W-40, or 5W-30 and mated to an automatic S8 transmission, with EPA estimates of 20 mpg city, 30 mpg highway, and 24 mpg combined. Within this model’s reliability history, the 2013 model year sits near the low end of reported issues, having accumulated only six total owner complaints and zero recalls. That profile makes it a comparatively quiet entry, though researchers should note that air bags still rank as the top complaint area.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses OE oil filter 11428683168. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11428683168 alt 11428637820 |
| Engine air filter | 13717605913 |
| Spark plug | 12120037582 |
| Battery | 61217639053 |
| Front wiper blades | 61612458020 |
| Thermostat | 11538671514 |
| Cabin air filter | 64119272642 |
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic (S8) |
| EPA city / highway / combined | 20 / 30 / 24 mpg |
| Drivetrain | Rear-Wheel Drive |
| Recommended fuel | Premium Gasoline |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 6.8 qt of 0W-30 / 0W-40 / 5W-30 engine oil, DOT 4 brake fluid. Torque lug nuts to 103 ft-lbs, the oil drain plug to M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs. The firing order is 1-5-3-6-2-4. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Automatic Transmission Fluid | BMW part number 83222152426 |
| Automatic Transmission Fluid Capacity | 10.5-11.5 |
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 2 Pints |
| Engine Oil | 0W-30 · 0W-40 · 5W-30 · 5W-40 |
| Engine Oil Capacity | 6.8 qt |
| Power Steering Fluid | Use Pentosin CHF 11S |
| Crankshaft Pulley and/or Damper Bolts | 18 ft-lbs |
| Intake Manifold to Engine Bolts | 11 ft-lbs |
| Engine Oil Pan Drain Plug | M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs |
| Lug Nuts | 103 ft-lbs |
| Cylinder Firing Order | 1-5-3-6-2-4 |
| Spark Plug Manufacturer | BMW |
| Refrigerant | R134a |
| Refrigerant Capacity | 1.75-3.00 lbs |
| Oil Group | PAG |
| Oil Type | 46 |
| Optional BCI Group Number | 49 |
| Optional BCI Cranking Performance | 850 cca |
| Pressure Test | 21.7 psi |
| Radiator Cap Pressure Relief | 28-32 psi |
| Engine Compression | 145-232 PSI. 29 maximum variation. psi |
| Brake Application | WITH FN3 |
| Torque to Knuckle | 81 ft-lbs |
| Minimum Pad Thickness | Front: 0.145; Rear: 0.145 pads |
| Brake Application | WITH FN3 |
| Rotor Nominal Thickness From | 0.945 in |
| Rotor Nominal Thickness To | 0.945 in |
| Rotor Minimum Machining | 0.031 in |
| Rotor Discard at or Under | 0.882 in |
| 1 | 15 ft. lbs., Step 2: 140 | 15 ft. lbs |
Prep Do not reuse old bolts
| 1 | 22.0 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | Bolts 1-10 90 degrees | 90 degrees |
| 4 | 45 degrees | 45 degrees |
| 1 | 6 ft. lbs., Step 2: 9.6 | 6 ft. lbs |
| 1 | 15 ft. lbs., Step 2: 70 | 15 ft. lbs |
Normal service, condensed from the factory interval matrix.
| At 150,000 mi | Oxygen Sensor (replace) |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
Owner complaints about the 2013 BMW 640i Convertible top in one area — the air bags, 1 of 6 reports (17%), well ahead of the next concern. NHTSA has issued no recalls for this vehicle, so these are owner-reported concerns only. 0 of the reports describe a crash and 0 a fire — a small share of the total, but worth weighing against the air bags pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.
All 6 complaints on record, top 6 components.
Source: NHTSA Office of Defects Investigation complaint database.
No recall campaigns on record with NHTSA for this vehicle as of the last data refresh.
Showing 5 of 355 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| B510819 | 2024-01-16 | Electrical System | The basic conditions for initializing the power windows are not met. |
| B611305 | 2024-01-11 | Electrical System | The electrical system of BMW vehicles has been subject to an ongoing development process… |
| B340914 | 2023-06-01 | Wheels | The Dynamic Stability Control (DSC) warning light comes on while driving. The following… |
| B651523 | 2023-05-01 | Electrical System | After programming the head unit (HU-H2), activating the FSC (German word Freischaltcode)… |
| B840822 | 2023-03-01 | Electrical System | The 3G network in the US has been shut down. This means that only the 4G network will be… |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
6.8 qt of 0W-30, 0W-40, 5W-30, 5W-40 OIL MEETING BMW SPECIFICATION LL01, per the factory manual.
NHTSA lists 0 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 20 city / 30 highway / 24 combined mpg.