Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2026 530i.
The 2026 BMW 530i is EPA-rated at 28/35/31 mpg city/highway/combined.
Fluid capacities, tune-up values and fuel economy at a glance.
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic (S8) |
| Overall length | 199.2 in |
| Overall width | 74.8 in |
| Overall height | 59.1 in |
| Wheelbase | 118.1 in |
| Curb weight | 4158 lb |
| Track (front / rear) | 63.8 / 65.4 in |
| Weight distribution (front / rear) | 50/50 |
| EPA city / highway / combined | 28 / 35 / 31 mpg |
| Drivetrain | Rear-Wheel Drive |
| Passenger volume | 98 cu ft |
| Cargo volume | 14 cu ft |
| Recommended fuel | Premium Gasoline |
0–60 mph, quarter-mile, horsepower and torque from independent road tests.
Independent road tests for the 530i of this era, listed by trim and engine — this page spans more than one engine, so no single horsepower figure is shown.
| Year | Trim / engine | 0–60 | ¼ mile | HP | Drivetrain |
|---|---|---|---|---|---|
| 2024 | 530 530i Sedan (M Sport) 2.0L Turbo I-4 + Elec | 5.50 sec | 14.10 sec | 255 hp | RWD |
| 2024 | 530 530i xDrive Sedan (M Sport) 2.0L Turbo I-4 + Elec | 5.50 sec | 14.20 sec | 255 hp | AWD |
| 2024 | 530 530i xDrive Sedan (M Sport) 2.0L Turbo I-4 + Elec | 5.60 sec | 14.30 sec | 255 hp | AWD |
| 2024 | 530 530i xDrive Sedan (M Sport) 2.0L Turbo I-4 + Elec | 6.00 sec | 14.40 sec | 255 hp | AWD |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Cross-vehicle references for the kinds of data on this page.
EPA figures are 28 city / 35 highway / 31 combined mpg.