Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the spark plugs every 60,000 mi.
| Every 60,000 mi | Spark Plugs (replace) |
| At 120,000 mi | Oxygen Sensor (replace) |
Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2012 335i Sedan.
The 2012 BMW 335i Sedan is a passenger car constructed on the F30 platform that utilizes an Automatic (S8) transmission to achieve EPA fuel economy ratings of 23/32/26 mpg. Engine maintenance calls for 6.9 qt of oil compatible with 15W-40, 10W-40, or 10W-30 API SJ viscosities, establishing the mechanical requirements for this configuration. This model year's reliability history is defined by 33 total owner complaints and 7 recalls with air bags identified as the top complaint area, meaning researchers should scrutinize safety system reports to fully understand the vehicle's long-term ownership profile.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 48 · 570 CCA battery, OE oil filter 11428683168. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11428683168 alt 11428637821 |
| Engine air filter | 13717602643 |
| Spark plug | 12120037582 |
| Battery | 61217586961 alt 61217586962 |
| Front wiper blades | 61612455435 alt 61612455437 |
| Cabin air filter | 64319313519 alt 64319142114 |
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic (S8) |
| Overall length | 182.3 in |
| Overall width | 71.3 in |
| Overall height | 56.3 in |
| Wheelbase | 110.6 in |
| Curb weight | 3571 lb |
| Track (front / rear) | 60.6 / 62.2 in |
| Weight distribution (front / rear) | 52/48 |
| EPA city / highway / combined | 23 / 32 / 26 mpg |
| Drivetrain | Rear-Wheel Drive |
| Passenger volume | 96 cu ft |
| Cargo volume | 13 cu ft |
| Recommended fuel | Premium Gasoline |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 6.9 qt of 15W-40 / 10W-40 / 10W-30 API SJ engine oil, DOT 4 brake fluid. Torque lug nuts to 88 ft-lbs, the oil drain plug to M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs. The firing order is 1-5-3-6-2-4. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Automatic Transmission Fluid | BMW part number 83222152426 |
| Automatic Transmission Fluid Capacity | 10.5-11.5 |
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 1.8 Pints |
| Engine Coolant | ETHYLENE GLYCOL |
| Engine Oil Capacity | 6.9 qt |
| Manual Transmission Fluid | BMW MTF part number 83222167666 |
| Manual Transmission Fluid Capacity | 2.1-2.5 |
| Crankshaft Pulley and/or Damper Bolts | 18 ft-lbs |
| Intake Manifold to Engine Bolts | 11 ft-lbs |
| Engine Oil Pan Drain Plug | M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs |
| Lug Nuts | 88 ft-lbs |
| Cylinder Firing Order | 1-5-3-6-2-4 |
| Spark Plug Manufacturer | BMW |
| Refrigerant | R134a |
| Refrigerant Capacity | 1.19-1.40 lbs |
| Oil Group | PAG |
| Oil Type | 46 |
| Oil Capacity | 5.70-6.50 oz |
| Optional BCI Group Number | 94R |
| Optional BCI Cranking Performance | 640 cca |
| Standard BCI Group Number | 48 |
| Engine Compression | 145-232 PSI. 29 maximum variation. psi |
| Minimum Pad Thickness | Front: 0.145; Rear: 0.145 pads |
| Rotor Nominal Thickness From | 0.394 in |
| Rotor Nominal Thickness To | 0.394 in |
| Rotor Discard at or Under | 0.331 in |
| 1 | 15 ft. lbs., Step 2: 140 | 15 ft. lbs |
Prep Do not reuse old bolts
| 1 | 22.0 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | Bolts 1-10 90 degrees | 90 degrees |
| 4 | 45 degrees | 45 degrees |
| 1 | 6 ft. lbs., Step 2: 9.6 | 6 ft. lbs |
| 1 | 15 ft. lbs., Step 2: 70 | 15 ft. lbs |
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the spark plugs every 60,000 mi.
| Every 60,000 mi | Spark Plugs (replace) |
| At 120,000 mi | Oxygen Sensor (replace) |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
Owner complaints about the 2012 BMW 335i Sedan dominate in one area — the air bags, 14 of 33 reports (42%), well ahead of the next concern. That matters, because the air bags are also the target of recall 20V-017 on this vehicle — so the single most useful check before buying or servicing one is confirming it was actually performed. 2 of the reports describe a crash and 0 a fire — a small share of the total, but worth weighing against the air bags pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.
All 33 complaints on record, top 8 components.
Source: NHTSA Office of Defects Investigation complaint database.
Showing 2 of 3 campaigns on record for this vehicle.
BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013… Remedy: BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The…
BMW North America, LLC (BMW) is recalling certain model year 2012-2015 320i, 320xi, 328i, 328xi, 335i, 335xi, and ActiveHybrid3 vehicles manufactured October 20, 2011, to June 22, 2015, 2014-2015 328xi Sports Wagon… Remedy: BMW will notify owners, and dealers will upload revised software to correct the issue, free of charge. The recall began on October 7, 2015. Owners may contact BMW customer service…
Showing 5 of 592 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| B012016 | 2025-02-20 | Electrical System | The Footwell Module (FRM) limited warranty for defects in materials and / or workmanship… |
| B063924 | 2024-05-09 | Engine | Hot-Film Air Mass Meter Return |
| B510819 | 2024-01-16 | Electrical System | The basic conditions for initializing the power windows are not met. |
| B611305 | 2024-01-11 | Electrical System | The electrical system of BMW vehicles has been subject to an ongoing development process… |
| SB23-01 | 2023-08-02 | Steering | Spl Parts, Inc. communications index accompanying MCP uploads 23mc40464 & 23mc40471 |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
6.9 qt of HIGH PERFORMANCE MINERAL OILS: ABOVE 5 degrees F: 15W-40 API SJ, SL OR SM, -5 degreesF TO 68 degrees F: 10W-40 API SJ, SL OR SM, 5 degreesF TO 50 degrees F: 10W-30 API SJ, SL OR SM, BELOW 50 degrees F: 5W-30 API SJ, SL OR SM, BELOW 32 degrees F: 5W-20 API SJ, SL OR SM, HIGH PERFORMANCE SYNTHETIC OILS: 5W-40 API SJ, SL OR SM, per the factory manual.
NHTSA lists 7 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 23 city / 32 highway / 26 combined mpg.